home *** CD-ROM | disk | FTP | other *** search
- X-Gateway-Source-Info: INTERNET
- Path: sparky!uunet!stanford.edu!agate!dog.ee.lbl.gov!network.ucsd.edu!mvb.saic.com!tgv.com!info-multinet
- Date: 17 AUG 92 20:03:50 GMT
- Newsgroups: vmsnet.networks.tcp-ip.multinet
- X-Return-path: <info-multinet-relay@TGV.COM>
- X-RFC822-From: cvm@NAUVAX.UCC.NAU.EDU (Chris Michels)
- From: cvm@NAUVAX.UCC.NAU.EDU
- Subject: RE: TN3270 "feature"
- Organization: The INFO-MULTINET Community
- Message-ID: <2B200FDA17AUG92200350@TGV.COM>
- Nntp-Posting-Host: Mvb.Saic.Com
- Lines: 27
-
- >> I knew I went to TGV MULTINET for a reason; because it was good.
- >>It is in fact so good that I now have a small unexpected problem with
- >>tn3270 connections.
- >>
- >> Seems I now can get full screen mode which I didn't have access to
- >>with TWG. Great. Now my users have full screen editing etc with their
- >>connections to Big Blue. The problem is with multi-page output. We see
- >>a "holding" message at the end of a screen and don't know what to type
- >>to get the next screen. I probably should ask an IBM person but I don't
- >>know any.
- >
- >I believe that what the user needs is the PA1 key. Which for a VT100 class
- >terminal (or VT200, 300, 400) would be ^P1 (Control-P followed by a 1) or
- ><ESC><PF1> (Escape followed by a PF1). The key sequences are defined in
- >MULTINET:MAP3270.DAT.
- >
- >Regards,
- >-----Stuart
-
- I use the clear key (control-Z) to get the next screen when I have the
- holding message.
-
- --------------------------------------------------------------------------
- Chris Michels -- Systems Programmer cvm@nauvax.ucc.nau.edu
- Northern Arizona University -- Flagstaff, AZ cvm@nauvax.bitnet
- Phone: (602) 523-6495
-
-