home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: vmsnet.networks.tcp-ip.cmu-tek
- Path: sparky!uunet!utcsri!torn!cunews!nrcnet0!amtsg0.ime.nrc.ca!johnston
- From: johnston@amtsg0.ime.nrc.ca (Daniel F. Johnston)
- Subject: NFS exporting - Summary? Next Step.
- Message-ID: <1992Aug14.143212.14107@nrcnet0.nrc.ca>
- Sender: root@nrcnet0.nrc.ca (Operator)
- Nntp-Posting-Host: amtsg0.ime.nrc.ca
- Organization: National Research Council of Canada
- Date: Fri, 14 Aug 92 14:32:12 GMT
- Lines: 25
-
- SInce I started this thread about NFS working for CMU Tek 6.6-5
- I will try to offer a quick summary of the stuff running over
- the net.
-
- First: Do not use "$" (dollersigns) in your nfs.config file.
- If your device name uses a $, like any cluster disk, then
- define a system-wide logical name without a $ and use that
- instead.
-
- Be careful with your choice of ANONYMOUS user. If the username
- you select does not have world read access to the files, then
- the mount will not work.
-
- That is the summary so far... Now if I can only kick the users
- off my microVAX-3100 I would restart the CMU software and
- try it again. Maby this weekend.
-
- Thanks to everyone who contributed to the discussion!
-
- --
- Daniel (Dan) F. Johnston JOHNSTON@NRCAMT.IME.NRC.CA
- National Research Council of Canada Tel: (613) 993-6627
- Montreal Road Campus, Bldg. M-3 Fax: (613) 998-2771
- Ottawa, Ont. CANADA K1A 0R6
- (((((( ... but the opinions expressed are my own!! )))))))
-