home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!charon.amdahl.com!pacbell.com!mips!swrinde!cs.utexas.edu!asuvax!ennews!gtephx!georgej
- From: georgej@gtephx.UUCP (Jefferson George)
- Newsgroups: rec.autos.tech
- Subject: GM truck radios
- Keywords: radios
- Message-ID: <1992Aug19.211451.4058@gtephx.UUCP>
- Date: 19 Aug 92 21:14:51 GMT
- Distribution: na
- Organization: AG Communication Systems - Phoenix, AZ
- Lines: 43
-
-
- >Newsgroups: rec.autos.tech
- >Subject: Chevy truck stereo
- >Keywords: chevy
- >Message-ID: <BsyEvn.ss@andy.bgsu.edu>
- >Date: 14 Aug 92 03:26:10 GMT
- >Organization: Bowling Green State University B.G., Oh.
- >Lines: 7
-
- >A friend of mine was at a car show a while back and he has a buddy who owns a 91or 92 Chevy truck.
- > This guy stopped by who told them that he could make his
- >stereo sound louder for five bucks (factory, digital, cassette). They said
- >cool and he got in. He pressed several buttons got out and wouldn't tell them what he did but
- the stereo was louder now at full volume. Does anyone know
- >what kind of trick he used? I would love to know it.
- > Please E-MAIL me if you know what to do! Thanks,
- Joe
-
- here is the info!. I have been told that this no longer works on 92 models
-
- OR 1987+ GM trucks
-
-
- To turn on the amplifier
- ------------------------
- 1) turn on the radio
- 2) push the FADE-button arrow pointing DOWN and hold it
- 3) push the VOLUME-button on the LEFT side (decrease volume)
- 4) when this is done, an LD will light up above the word STEREO
-
- To turn on Dolby Noise Reduction
- --------------------------------
- 1) turn on the radio
- 2) push the FADE-button arrow pointing UP and hold it
- 3) push the VOLUME-button on the RIGHT side (increase volume)
- 4) when this is done, DNR will appear below the word STEREO
-
-
- --
- Jefferson George
- AG Communication Systems, Phoenix, Arizona
- Inet: gtephx!georgej@enuucp.eas.asu.edu
- UUCP: {ncar!noao!enuucp | att}!gtephx!georgej
-