home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.unix.sysv386
- Path: sparky!uunet!elroy.jpl.nasa.gov!ames!pacbell.com!att!news.cs.indiana.edu!syscon!gator!larry
- From: larry@gator.rn.com (Larry Snyder)
- Subject: Re: UUCP disconnects on ESIX SVR4.0.3 using ZyXEL modem
- Message-ID: <BtDzKL.Br6@gator.rn.com>
- Organization: The Gator Public Access Unix Site - 219-289-3745
- References: <JHPB.92Aug20190016@sarto.budd-lake.nj.us> <2561@news.cerf.net>
- Date: Sat, 22 Aug 1992 13:17:09 GMT
- Lines: 24
-
- jde@esix.everex.com (Jeff Ellis) writes:
-
- >In article <JHPB.92Aug20190016@sarto.budd-lake.nj.us> jhpb@sarto.budd-lake.nj.us (Joseph H. Buehler) writes:
- >>I am having a problem with an ESIX SVR4.0.3/ZyXEL modem combination.
- >>UUCP won't run more than about 15 to 20 minutes before it drops the
- >>connection. It does this with either inbound or outbound traffic.
- >>I'm using the stock ESIX asy driver with a port locked at 38400.
- >>
- >>Does anyone have any ideas?
-
- >If you are not using a 16550AFN UART chip you will have problems like this,
- >at 9600 baud or above you will drop char's and get ALARMS with out the '550.
-
- We have one site who runs an older release of Dell (SVR4 2.1 I believe)
- (SVR4 2.0) with a Telebit Trailblazer Plus locked at 19200 with bidirectional
- communications using an 16450. His modem can keep up with the best of them.
-
- So it might be slightly OS dependent as well as hardware limited. It's
- pretty bad if an OS can't support at least one regular serial line at
- 19200.
-
- --
- Larry Snyder internet: larry@gator.rn.com
- keeper of the Gator uucp: uunet!gator!larry
-