home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.terminals
- Path: sparky!uunet!paladin.american.edu!europa.asd.contel.com!darwin.sura.net!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!usenet.ins.cwru.edu!cleveland.Freenet.Edu!ab245
- From: ab245@cleveland.Freenet.Edu (Sam Latonia)
- Subject: ADM-3 DUMB TERMINAL
- Message-ID: <1992Aug18.170820.29901@usenet.ins.cwru.edu>
- Sender: news@usenet.ins.cwru.edu
- Nntp-Posting-Host: slc4.ins.cwru.edu
- Organization: Case Western Reserve University, Cleveland, Ohio, (USA)
- Date: Tue, 18 Aug 92 17:08:20 GMT
- Lines: 18
-
-
- I have a ADM-3 dumb terminal and am starting to have a problem
- with the monitor on it. It is from time to time trying to
- colaps from side to side. As if it was a vertical problem. Once
- in a while after 10 or 20 mins. of the monitor jurking from
- both left and right sides about a 1/4" to the center it went all
- the way leaving a vertical line up the center of the screen
- After 5 min. of being turned off it came back okay. I think this
- must be a vertical chip on the monitor board but don't have and
- info on the ADM-3 at all. Can some one that might know about these
- ADM-3 terminals tell me what chip or cap or rerister that I might
- check into to correct this problem......Thanks you
- --
- "HELP" I've fallen and I can't reach the keyboard!
- **************************************************
- THE FIRESIDE BBS 884-9728
- WHERE THE PARTICULAR PEOPLE COMMUNICATE!
-