home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!ohstpy!mecsys!wvcc!wvc
- Newsgroups: comp.sys.tandy
- Subject: Re: Connecting Multisync monitor to CoCo 3 RGB
- Message-ID: <1992Aug22.082437.51@wvcc.uucp>
- From: wvc@wvcc.uucp
- Date: 22 Aug 92 08:24:37 EST
- References: <1992Aug20.201955.1511@usenet.ins.cwru.edu>
- Organization: in Upper Arlington, Ohio
- Lines: 37
-
- In article <1992Aug20.201955.1511@usenet.ins.cwru.edu>, trier@slc6.ins.cwru.edu (Stephen C. Trier) writes:
- > Does anyone know how to build a cable to connect my CoCo 3 RGB port to an
- > NEC Multisync 2A monitor, if possible?
- >
-
- Unknown to me.
-
- > Alternately, could anyone provide me with the pinout of the CoCo 3 RGB port
- > so that I can try to figure it out myself?
- >
-
- RGB Monitor Jack Pin Location:
-
- Looking at the outside of the RGB OUT jack on the bottom of the computer:
-
- 1. Ground
- 2. Ground
- 3. Red
- 4. Green
- 5. Blue
- 6. Polarity (No Pin)
- 7. Sound
- 8. Hsync
- 9. Vsync
- 10. No Connection
-
- +----------+
- | 9 7 5 3 1|
- |10 8 6 4 2|
- +----------+
-
- --
- /
- Bill Valentine-Cooper at wvc@lodge.enet.dec.com if work-related or
- wvc@wvcc.uucp (mec.ohio.gov!wvcc!wvc) otherwise.
- \
- My secretary has disavowed any knowledge of my activities.
-