home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.sun.hardware
- Path: sparky!uunet!charon.amdahl.com!pacbell.com!mips!sdd.hp.com!decwrl!csus.edu!netcom.com!kemnitz
- From: kemnitz@netcom.com (Greg Kemnitz)
- Subject: Help: SCSI tape drive wont work
- Message-ID: <48#n9dq.kemnitz@netcom.com>
- Date: Thu, 20 Aug 92 23:49:53 GMT
- Organization: Netcom - Online Communication Services (408 241-9760 guest)
- Lines: 32
-
-
- SUN Sparc with cd, 2 HDs and on1 TTI CTS-8000w 8mm Tape drive.
- When the system boots up, I got this error message.
-
- vmunix: esp0: Target 5 didn't disconnect after sending COMMAND COMPLETE
-
- The tape drive is the last in the SCSI chain with a terminator.
-
- The set up is:
-
- scsibus0 at esp # declare first scsi bus
- disk sd0 at scsibus0 target 3 lun 0 # first hard SCSI disk
- disk sd1 at scsibus0 target 4 lun 0 # second hard SCSI disk
- disk sd2 at scsibus0 target 2 lun 0 # third hard SCSI disk
- disk sd3 at scsibus0 target 0 lun 0 # fourth hard SCSI disk
- disk sd4 at scsibus0 target 1 lun 0 # fifth hard SCSI disk
- tape st0 at scsibus0 target 5 lun 0 # first SCSI tape
- disk sr0 at scsibus0 target 6 lun 0 # CD-ROM device
-
-
- target 6 is cdrom
- target 5 is the tape drive
- target 3 is sun HD
- target 4 is an external HD
-
-
- The dip switch on the back of the tape drive is:
- 1,7,10,12 on and off the rest.
-
- Anyone knows what's the problem I have?
-
-
-