home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.sun.admin
- Path: sparky!uunet!mcsun!Germany.EU.net!news.netmbx.de!zrz.tu-berlin.de!math.fu-berlin.de!informatik.tu-muenchen.de!LRZnews!schneck
- From: schneck@Physik.TU-Muenchen.DE (Bernhard Schneck)
- Subject: Re: Hardware control on ELC serial port(s)
- Message-ID: <schneck.713732693@Physik.TU-Muenchen.DE>
- Sender: news@news.lrz-muenchen.de (Mr. News)
- Organization: Leibniz-Rechenzentrum, Muenchen (Germany)
- References: <1992Aug13.032420.5987@cs.tulane.edu>
- Date: Thu, 13 Aug 1992 19:04:53 GMT
- Lines: 17
-
- mb@cs.tulane.edu (Mark Benard) writes:
-
- >I have an adapter cable to turn the serial port on an ELC into two ports,
- >but I have been told that while all hardware signals are available on
- >port A, RTS is not available on port B. Is this true? That would
- >make it a problem running a fast modem on port B.
-
- No. RTSA is on pin 4, RTSB is on 19.
-
- What I'm missing is a DTRB ... kill -9 SUN ...
-
- \Bernhard.
- --
- Bernhard Schneck | Email: Bernhard.Schneck@Physik.TU-Muenchen.DE
- GeNUA Gesellschaft fuer Netz- | TU Muenchen Physik | There is no problem so big
- und UNIX-Administration mbH | 8046 Garching | that it cannot be run away
- 8000 Muenchen 83, Germany | Germany | from. Illusions, R. Bach
-