home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!contex!sam.contex.com!james
- From: james@sam.contex.com (James McQueston)
- Newsgroups: comp.sys.sgi
- Subject: Re: Crimson, symmon, kp scsi 0
- Keywords: irix debugging symmon
- Message-ID: <2891@contex.contex.com>
- Date: 21 Aug 92 13:59:30 GMT
- References: <2887@contex.contex.com> <or33jog@zuni.esd.sgi.com>
- Sender: news@contex.contex.com
- Organization: Xyvision Design Systems
- Lines: 15
-
- In article <or33jog@zuni.esd.sgi.com> olson@anchor.esd.sgi.com (Dave Olson) writes:
- >Sounds like somebody didn't test symmon adequately (or more accurately,
- >the code in idbg.o that prints scsi data structures). I guess you
- >are out of luck. For all I know, the same happens in 4.0.5, although
-
- Just as an FYI, in case I wasn't clear, this was demonstrated on a Crimson
- running *4.0.5A* installed from officially shipped CD's, and the problem
- I'm tracking down is in the *standard* SGI driver. This is one of those
- times where as you used to say (from my memory) Life would be easier if we
- had the source code. ;-)
- --
- -----
- James H. McQueston james@contex.com
- Xyvision Color Systems, Inc. (617) 246-1776 x 5523 (office, voicemail)
- Wakefield MA 01880-1291 (617) 245-4471 (lab phone direct)
-