home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!convex!darwin.sura.net!zaphod.mps.ohio-state.edu!swrinde!ringer!ricky.brainlab.utsa.edu!senseman
- From: senseman@ricky.brainlab.utsa.edu (David M. Senseman)
- Newsgroups: comp.sys.sgi
- Subject: Re: VideoCreator
- Message-ID: <1992Aug20.235305.953@ringer.cs.utsa.edu>
- Date: 20 Aug 92 23:53:05 GMT
- References: <1992Aug20.150306.496@utagraph.uta.edu> <1992Aug20.195653.27810@odin.corp.sgi.com>
- Sender: news@ringer.cs.utsa.edu
- Distribution: comp
- Organization: University of Texas at San Antonio
- Lines: 21
- Nntp-Posting-Host: ricky.ls.utsa.edu
-
- In article <1992Aug20.195653.27810@odin.corp.sgi.com> mohsen@pele.csd.sgi.com (Mohsen Hosseini) writes:
- >In article <1992Aug20.150306.496@utagraph.uta.edu>, wford@arrirs04.uta.edu (William A. Ford) writes:
- >What you need is a cable that is bnc on one end and D-type on the other. The part number for
- >such a cable is:
- >
- >018-8105-001 CABLE ASSY,RGB,13W3/BNC.
- >You will need two of these cables. One to go from th system to the VC and then from VC to the monitor.
- >
-
- Hmmmm....this doesn't sound right. What about the "little pins" on the
- 13W3 connector? If you saw my earlier posting on this group, the
- "little pins" set the monitor type through a passive circuit. Unless
- you are using a new Hitachi 19" monitor, then you will have problems.
-
- At least that is what I have been told. Maybe someone else at SGI
- would care to comment?
-
- --
- David M. Senseman (senseman@lonestar.utsa.edu)
- Division of Life Sciences
- The University of Texas at San Antonio
-