home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!olivea!sgigate!odin!mips!swrinde!elroy.jpl.nasa.gov!mahendo!awds.imsd.contel.com!wlbr!lonex.rl.af.mil!nortond
- From: nortond@lonex.rl.af.mil (Doug Norton)
- Newsgroups: comp.sys.mac.system
- Subject: System 7.0.1/Quadra 900 Problems...
- Message-ID: <1992Aug13.192602.4414@lonex.rl.af.mil>
- Date: 13 Aug 92 19:26:02 GMT
- Sender: usenet@lonex.rl.af.mil (USENET Account)
- Organization: Rome Labs Photonics Center
- Lines: 22
- Originator: nortond@lonexb.rl.af.mil
- Nntp-Posting-Host: lonexb.rl.af.mil
-
- We are having some problems with System 7.0.1 with the latest tuneup
- installed. Here's a brief listing of the chain of events...
-
- -First, we noticed that the system (Quadra 900) was running a bit slow
- -We could not print with PrintMonitor it told us that there was not enough
- memory for PrintMonitor even after we increased it to 1MB. We were not
- printing anything big just a Print Window... from the finder's File menu.
- -We pulled PrintMonitor from the Extensions folder and tried to print, again
- not enough memory to print (Finder Error not a printer error)
- -We then tried to open the System Suitcase, the Finder told us that it was
- damaged.
- -We tried to reinstall System 7, Quadra froze.
- -We trashed the System File on the Quadra and then successfully installed
- System 7 and TuneUp
- -Opened the Control Panel and set 256 colors and then added a desk pattern
- and when we closed the General CP the System froze.
-
- We did this several times and it produced the same problem. Can someone
- give me some advice? Thanks!!!
-
- Doug Norton
- nortond@lonex.rl.af.mil
-