home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!cs.utexas.edu!bcm!lib!proto!howarth
- From: howarth@rice.edu (Jack W. Howarth)
- Newsgroups: comp.sys.mac.hardware
- Subject: color monitor artifacts?
- Message-ID: <howarth.714518283@proto>
- Date: 22 Aug 1992 21:18:03 GMT
- Sender: usenet@lib.tmc.edu
- Lines: 20
- Nntp-Posting-Host: proto.med.uth.tmc.edu
-
-
- I just installed an Xceed MacroColor 30 24-bit color card in my SE/30 and
- have hooked it up to a Sony MultiScan 1304S using Xceeds cable adaptor. What
- I have noticed is that compared to the 9 inch screen I can notice (if i look
- for them) what appears to be movement if the scan lines up the screen. These
- don't appear on the B/W display of the SE/30. Any ideas about these. The
- screen is stable and doesn't jump at all. I just can notice tiny bands a few
- pixels apart moving up the screen. Is these due to incomplete multisycning or
- maybe the monitor cable from the monitor is picking up noise from the SE/30's
- circuitry? Or is this just more noticable on a 14 inch screen? Any solutions
- would be welcome...
- Jack
-
- --
- -------------------------------------------------------------------------
- Jack W. Howarth, Ph.D. Univ. of Texas Medical School
- Research Fellow P.O. Box 20708
- Department of Biochemistry Houston, Texas 77225
- -------------------------------------------------------------------------
- howarth@proto.med.uth.tmc.edu Phone: 713-792-5667 FAX: 713-794-4150
-