home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.sys.ibm.pc.misc:11476 comp.os.msdos.misc:4706
- Newsgroups: comp.sys.ibm.pc.misc,comp.os.msdos.misc
- Path: sparky!uunet!cs.utexas.edu!usc!sol.ctr.columbia.edu!usenet.ucs.indiana.edu!newshost.cs.rose-hulman.edu!news
- From: lindemaj@HYDRA.ROSE-HULMAN.EDU (Andy Lindeman)
- Subject: Re: Qemm + Stacker = Reboot?
- Message-ID: <1992Aug14.043402.28906@cs.rose-hulman.edu>
- Sender: news@cs.rose-hulman.edu (The News Administrator)
- Nntp-Posting-Host: rosevc.rose-hulman.edu
- Reply-To: lindemaj@HYDRA.ROSE-HULMAN.EDU
- Organization: Rose-Hulman Institute of Technology
- References: <1992Aug6.050916.28599@selway.umt.edu>,<1992Aug6.234302.8605@hparc0.aus.hp.com>
- Date: Fri, 14 Aug 1992 04:34:02 GMT
- Lines: 25
-
- In article <1992Aug6.234302.8605@hparc0.aus.hp.com>, doug@hparc0.aus.hp.com (Doug Parsons) writes:
- >
- >Read the Stacker manual about using QEMM's Optimize feature. It is
- >slightly convoluted, but is necessary because the C: drive is only the
- >C: drive until the DEVICE=SSWAP line in config; then it is the D: drive
- >and the compressed data file becomes C:.
- >
- >The manual tells you to exit optimize at certain steps, and copy files
- >that are being used for the optimization. I've done it on my pc and
- >it works ok, provided that you follow the steps to the letter.
- >
- >douginoz.
- >
-
-
- There's an even better solution to this: get a "Qemm Optimize aware" version of
- sswap on any simtel mirror in the /msdos/qemm directory! Saves one hell of a
- lot of hassle! Andy
-
-
-
- Andy Lindeman
-
- lindemaj@rosevc.rose-hulman.edu <- preferred address
- ajlindem@ucs.indiana.edu
-