home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.sys.ibm.pc.hardware:22077 sci.electronics:14506
- Newsgroups: comp.sys.ibm.pc.hardware,sci.electronics
- Path: sparky!uunet!decwrl!csus.edu!netcom.com!rla
- From: rla@netcom.com (Robert Armstrong)
- Subject: Geometry information for old Tandon drive needed!
- Message-ID: <0f0mwj=.rla@netcom.com>
- Date: Tue, 18 Aug 92 07:57:52 GMT
- Organization: Netcom - Online Communication Services (408 241-9760 guest)
- Followup-To: poster
- Keywords: geometry tandon
- Lines: 16
-
- This is a longshot, but here goes: I have an old Tandon
- hard disk. It's a 5" form factor, full height, MFM, 30Mb
- (actually formats out to about 33Mb, I believe) capacity.
- It would have been manufactured around the mid to late 1980s.
-
- Unfortunately, there's no model number on the drive. I
- only know it's a Tandon because their name is silk screened
- on the PCB!
-
- Does anyone recognize this drive ? Can you tell me the
- geometry ?
-
- Thanks very much,
- Bob Armstrong
- rla@netcom.com
-
-