home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.sys.ibm.pc.hardware:21830 comp.sys.ibm.pc.misc:11486
- Newsgroups: comp.sys.ibm.pc.hardware,comp.sys.ibm.pc.misc
- Path: sparky!uunet!news.univie.ac.at!tuvie!iiasa.ac.at!stefan
- From: stefan@iiasa.iiasa.ac.at (Stefan BOSNJAKOVIC)
- Subject: Lantastic 4.1 AI Low-Level Drivers
- Message-ID: <1992Aug14.125534.6901@iiasa.ac.at>
- Originator: stefan@iiasa
- Sender: news@iiasa.ac.at
- Organization: International Institute for Applied Systems Analysis, Laxenburg, Austria
- Date: Fri, 14 Aug 1992 12:55:34 GMT
- Lines: 28
-
-
- Hi Netland!
-
- The subject tells it all - does any one of you know where I can get the
- low-level drivers for the Adapter-Independent version of Lantastic 4.1
- for the following ethernet-cards:
-
- .) Intel EtherExpress
- .) BICC Isolan 4110
-
- THe story is this: I started off with the Zero-Slot Version with the parallel
- port drivers. It works great and is the only - as far as I know - really usable
- fully blown peer-to-peer network that runs without boards. But now I received
- those adapters and - obviously - would like to switch the transport media.
-
- Actually I have some drivers - like for the Artisoft, 3COM and NOvell cards,
- but not for those I received.
-
- So, if some kind soul could e-mail me these drivers I would be very thankful.
- Also a ftp-adress or BBS-number, where I could download these things would
- be sufficient. Or does anybody know how to tweak an ordinary net-bios driver
- to work together with Lantastic 4.1 AI ?
-
-
- Greetings, Stef!
-
-
- Stefan Bosnjakovic - IIASA - stefan@iiasa.ac.at
-