home *** CD-ROM | disk | FTP | other *** search
- From: tonyc@a4430ux.esr.hp.com ( Tony Cox (SR) )
- Date: Sat, 22 Aug 1992 10:52:18 GMT
- Subject: Re: How to connect HP 700/92 to use as an ASCII terminal for HP 9000/350?
- Message-ID: <4220023@a4430ux.esr.hp.com>
- Organization: Hewlett-Packard Rockville
- Path: sparky!uunet!wupost!sdd.hp.com!hpscdc!cupnews0.cup.hp.com!hppad.waterloo.hp.com!hppad!hpfcso!hpfcmgw!hpfcse!a4430ux!tonyc
- Newsgroups: comp.sys.hp
- References: <1992Aug21.193339.6173@usenet.ins.cwru.edu>
- Lines: 26
-
- / a4430ux:comp.sys.hp / mike@sneezy.EEAP.CWRU.Edu (Michael C. Sidman) / 3:33 pm Aug 21, 1992 /
- Greetings HPeople,
-
- I've recently acquired a working HP 700/92 (without manuals,
- of course) and would like to it be a dumb ASCII terminal (like there
- were smart ones...) for my HP LAN of HP 9000/3xx machines, running HP
- UX 7.0.
-
- I'd appreciate any help, or pointers, I'm not sure where to
- begin. Feel free to post or email.
- >>>Mike, Where do you want to hook up terminal....to a mux, the
- >>>builtin ports, a serial card? What other info do you need besides
- >>>cabling? tonyc
-
- Thanks in advance for your time.
-
- Regards,
-
- Michael
-
- --
- Michael C. Sidman | mike@snowhite.eeap.cwru.edu
- Electrical Engineering and Applied Physics |____________________________
- Case Western Reserve University | "Cleveland - it's not hell,
- Cleveland, Ohio 44106 | but a damn good simulation."
- ----------
-