home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!sun-barr!cs.utexas.edu!swrinde!elroy.jpl.nasa.gov!ucla-cs!ucla-se!CAD.UCLA.EDU!jonathan
- From: jonathan@CAD.UCLA.EDU (Jonathan Katz)
- Newsgroups: comp.sys.atari.8bit
- Subject: Question -- Atari 800 lost color -- How to fix?
- Message-ID: <7833@lee.SEAS.UCLA.EDU>
- Date: 12 Aug 92 19:13:48 GMT
- Sender: news@SEAS.UCLA.EDU
- Organization: U.C.L.A. Computer Aided Design Laboratory
- Lines: 19
-
- Hi,
- I hope this isnt a common question, but, my Atari 800 recently lost the
- ability to produce color (perhaps only red(?)). This failing occurs on
- both the "ch 3" and "ch 2" output as well as out of the NTSC(?) port
- on the side (the 5 pin din).
-
- 1) Is this a common problem?
- 2) Is there a fix that I could do?
- 3) If no to 2, where does one take 800's to be fixed and is it worth it
- over buying another used.
-
- Thanks for the help,
- Jonathan
-
- --
- qp HumanNet: Jonathan Katz | Computer Aided Design Laboratory qp
- db AT&T-Net: (310)-825-7821 |_________ ---(*)--- db
- qp Internet: jonathan@kanga.cad.ucla.edu |______Do you read rec.humor? qp
- db SnailNet: 38-138 Engineering IV, UCLA, LA, Ca, 90024| No, frayed knot... db
-