home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.apple2
- Path: sparky!uunet!cs.utexas.edu!qt.cs.utexas.edu!yale.edu!jvnc.net!nuscc!nusunix3.nus.sg!isc10327
- From: isc10327@nusunix3.nus.sg (ONG TAT-WEE)
- Subject: Re: HELP: 9600bps modem won't work (2nd request)
- Message-ID: <1992Aug13.052733.11609@nuscc.nus.sg>
- Sender: usenet@nuscc.nus.sg
- Organization: National University of Singapore
- References: <1992Aug12.060048.21300@cco.caltech.edu>
- Date: Thu, 13 Aug 1992 05:27:33 GMT
- Lines: 23
-
- toddpw@cco.caltech.edu (Todd P. Whitesel) writes:
- : isc10327@nusunix2.nus.sg (ONG TAT-WEE) writes:
- :
- : >an IBM Clone and which refuses to work when used on an Apple IIGS
- :
- : No modem is like that.
- :
- : >right?! I've even tried changing the port rate to 19200 and it still
- : >doesn't work. BTW, what telecomm s/w are you using with your modem?
- :
- : ProTerm 3.0 and Kermit. Kermit requires the control panel settings to be set
- : properly, and they tell you what to use in the documentation file.
- :
- : Todd Whitesel
- : toddpw @ tybalt.caltech.edu
-
- Do you think you can post your modem cable pinouts here for me?
- Seems that everyone is saying that high-speed modems need hardware
- handshaking. I would like to compare your cable pinouts with mine.
-
- - DOTW - :)
-
-
-