home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!wupost!sdd.hp.com!cs.utexas.edu!tamsun.tamu.edu!mtecv2!academ01!al158305
- From: al158305@academ01.mty.itesm.mx (Gustavo Cordova Avila)
- Newsgroups: comp.sys.amiga.introduction
- Subject: Re: wb2.05
- Message-ID: <al158305.714077767@academ01>
- Date: 17 Aug 92 18:56:07 GMT
- References: <kehlet.061j@kehlet.adsp.sub.org>
- Sender: usenet@mtecv2.mty.itesm.mx
- Lines: 26
- Nntp-Posting-Host: academ01.mty.itesm.mx
-
- kehlet@kehlet.adsp.sub.org (Jesper Kehlet) writes:
-
- >In article <19928.852.4026@dosgate> carl.bannenberg@canrem.com (carl bannenberg) writes:
- >> -> Hi there. I just recently upgraded to WB2.0... From what I've heard
- >> -> from people on the nets here, everyone has 2.04. However, on the
- >> -> disks I received, 2.05 was labelled. Having never heard of 2.05, I'm
- >>
- >> The only difference I've heard is a 'setpatch' patch for the A600/HD.
- >> Otherwise there is no difference on other Amigas
-
- >Most probably PrepCard and device driver for the PCMCIA-2... the A600 also
- >has a built-in IDE/XT -- all of this isn't supported by the original 2.04
- >as it is...
-
-
- Nope, it has a 16bit ide controller, not an xt type. The xt type was
- only used in the A590, seemingly because C= had a lot (a lot, not many)
- of epson 8-bit ide drives.
-
- -Gus
-
- ps: but then, I could be wrong :)
- --
- Gustavo Cordova Avila | Majoring in Electronics & Computer Sciences
- al158305@academ01.mty.itesm.mx | "...I came from the Desert!!" (Sonora)
- al158305@[131.178.4.10] | RangerElf @ IRC (usually in #amiga)
-