home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.sys.amiga.audio:3089 comp.sys.amiga.hardware:14080 comp.sys.amiga.tech:51
- Newsgroups: comp.sys.amiga.audio,comp.sys.amiga.hardware,comp.sys.amiga.tech
- Path: sparky!uunet!munnari.oz.au!bruce.cs.monash.edu.au!monu6!eng-b7-g15-04.eng.monash.edu.au!10754555
- From: 10754555@eng2.eng.monash.edu.au (DAVID RICHARDS)
- Subject: Re: Help needed with homemade Audio Digitizer!!!!!
- Message-ID: <10754555.9.713776494@eng2.eng.monash.edu.au>
- Lines: 29
- Sender: news@monu6.cc.monash.edu.au (Usenet system)
- Organization: Faculty of Engineering, Monash University
- References: <1992Aug12.012755.28655@lonex.rl.af.mil>
- Date: Fri, 14 Aug 1992 07:14:54 GMT
-
-
- >
- >Help Me!!!!!!! I just finished building an Audio Digitizer from a schematic
- >I found laying around on some disks. The instructions were written by Bob
- >Cramer and Jamie Mueller. I wired it up exactly as shown in the diagram,
- >but every time I go to sample something (using AGMSRecord Sound and AniMan)
- >nothing seems to be going through to the computer. I try adjusting the input
- >level using the pot, and the volume control (using a radio walkman as a practice
- >source.) Nothing happens though!!!!
- >
- >My configuration is :
- >
- >A500 w/512k Chip
- > 512k Fast
- >Spartan SCSI Controller
- > Quantum 105Meg HD
- >
-
- If it's MONO, have you checked which channel (LEFT or RIGHT) your digitiser
- sends on and which the software receives?
-
- If it's STEREO, please mail me the schematics and I'll have a go, I build a
- mono one and it works fine.
-
- Also, is it self powered or powered by the A500? Not all A500s, as I have
- heard, can supply the power for the digitiser (you might be one of the
- unlucky few).
-
- OK, it's not much but it might help...
-