home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.protocols.tcp-ip.ibmpc:4734 news.software.readers:1648
- Newsgroups: comp.protocols.tcp-ip.ibmpc,news.software.readers
- Path: sparky!uunet!cis.ohio-state.edu!pacific.mps.ohio-state.edu!linac!convex!kemp
- From: kemp@convex.com (Phil Kemp)
- Subject: Re: Trumpet Shell for FTP Software TCP stack.
- Message-ID: <kemp.713806943@convex.convex.com>
- Sender: usenet@convex.com (news access account)
- Nntp-Posting-Host: convex1.convex.com
- Organization: CONVEX Computer Corporation, Richardson, Tx., USA
- References: <peter.359.713684839@psychnet.psychol.utas.edu.au> <1992Aug14.083700.26995@kub.nl>
- Date: Fri, 14 Aug 1992 15:42:23 GMT
- X-Disclaimer: This message was written by a user at CONVEX Computer
- Corp. The opinions expressed are those of the user and
- not necessarily those of CONVEX.
- Lines: 28
-
- In <1992Aug14.083700.26995@kub.nl> mvw@kub.nl (Maarten van Wijk) writes:
-
-
- >I have been trying this out and it works great. But I would like to
-
- I tried over a slip connection and could not get this to work. Either
- from DOS or under DV/X.
-
- >run it in an ms-dos window under windows 3.1, but that does not work.
- >I keep getting "599 Command timed out". Changing parameters for
-
- That's the error I get too.
-
- >trumpnet and the PIF file had no effect until now.
- >The FTP software version is 2.05. Am I trying something that is
- >impossible or using the wrong setup? Other FTP commands work OK under
- >windows.
-
- Ditto under DV/X
-
- Any ideas?
-
- PK
- --
- Phil Kemp, Systems Engineer Voice:(403)-233-2815
- CONVEX Computer Canada Ltd. Fax:(403)-261-2029
- Calgary, Alta. Internet:kemp@convex.com
-
-