home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.os.os2.misc
- Path: sparky!uunet!mcsun!sun4nl!dutrun!donau!dutecaj.et.tudelft.nl!linstee
- From: linstee@dutecaj.et.tudelft.nl (Erik van Linstee)
- Subject: No network object, but there should be..
- Message-ID: <1992Aug21.102306.2302@donau.et.tudelft.nl>
- Sender: news@donau.et.tudelft.nl (UseNet News System)
- Nntp-Posting-Host: dutecaj.et.tudelft.nl
- Organization: Delft University of Technology, Dept. of Electrical Engineering
- Date: Fri, 21 Aug 1992 10:23:06 GMT
- Lines: 11
-
- I was just reading through the manuals and found a passage saying
- that if your computer is connected to a network, a network object
- is put on your desktop. Now the computer I installed on is connected
- to a LAN through a IBM Token Ring card, but I did not get the object.
- Is there a way to install this afterwards, and why wasn't it straight
- off? The machine is an IBM PS/2 model 56 SX by the way.
-
- Erik
-
- --
- Erik van Linstee | linstee@duteca.et.tudelft.nl | I'll be back ...
-