home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1992 #18 / NN_1992_18.iso / spool / comp / os / coherent / 3726 < prev    next >
Encoding:
Internet Message Format  |  1992-08-15  |  2.2 KB

  1. Path: sparky!uunet!zaphod.mps.ohio-state.edu!n8emr!bluemoon!cmhgate!p1.f1110.n226.z1.FIDONET.ORG!Bret.Johnson
  2. From: Bret.Johnson@p1.f1110.n226.z1.FIDONET.ORG (Bret Johnson)
  3. Sender: ufgate@cmhgate.fidonet.org (newsout1.26)
  4. Newsgroups: comp.os.coherent
  5. Subject: Re: Modem speed
  6. Message-ID: <946908.2A8D772E@cmhgate.fidonet.org>
  7. Date: Fri, 14 Aug 92 19:58:03 EST
  8. Organization: FidoNet node 1:226/1110.1 - Flying High!, Marietta OH
  9. Lines: 55
  10.  
  11. Rick Kelly of 1:226/20 wrote to All of 1:226/20
  12. on <Aug 11 at 17:34>
  13.  
  14.  RK> From: rmk@rmkhome.UUCP (Rick Kelly)
  15.  RK> Newsgroups: comp.os.coherent 
  16.  RK> Organization: The Man With Ten Cats
  17.  RK> Reply-To: rmk@rmkhome.UUCP (Rick Kelly)
  18.  
  19.  RK> In article <1992Aug10.201022.16114@jr.rhein-main.de> 
  20.  RK> joachim@jr.rhein-main.de (Joachim Riedel) writes:
  21. >bill@glidden.UUCP (Bill Glidden) writes:
  22. >: I have a BocaResearch 14.4Kbps internal modem. Under DOS, I get really
  23. >: good transfer rates (about 1500bps). However, under Coherent, I am only
  24. >: getting a max of about 400bps. Actually, the rates range everywhere from
  25. >: ~= 60 to about 422bps. Any suggestions or hints (other than throwing
  26. >: away my modem?!)
  27. >
  28. >When you use Coherent 3.2 then you should not exceed 9600 Baud.
  29. >When you use 3.2.1 with the newer driver or even 4.0 then you should 
  30. ensure
  31. >to have a 16550AFN Uart in your serial card.
  32. >
  33. >I have here transfer rates (V32bis MNP4/V42bis/NONE):
  34. >
  35. >sz:   800 cps    (ZMODEM)
  36. >sb:  1300 cps    (YMODEM)
  37. >kermit5a: 800 cps (large windows)
  38. >uucp: 1000 cps - 1200 cps  (Taylor 1.3
  39. >
  40. >MODEM: USR Dual Standard.
  41. >Baudrate: fixed 19200 Baud
  42.  
  43. >PS: With 3.2 your transfer rates are that slow :-((
  44.  
  45.  
  46.  RK> With 3.2.1 running on my 386/33 I was running my serial port at 19200
  47.  RK> and using a Telebit T2500 set up for PEP transfers.  I was getting around
  48.  RK> 900 cps.  And I was using NS16550AFN.
  49.  
  50.  RK> A 286 would be a much different story.
  51.  
  52.   Rick,
  53.    
  54.       I tried to get 3.2.1A to run at 19200 and It would not work..
  55.  
  56.       I have a 16550AFN on com4. and a PM14400FXSA next to it..
  57.  
  58.       Maybe when I get 4.0 I can go 14.4 speeds?
  59.  
  60.                        Bret Johnson
  61.  
  62. --  
  63. Bret Johnson via cmhGate - Net 226 fido<=>uucp gateway Col, OH
  64. UUCP: ...!n8emr!bluemoon!cmhgate!1110.1!Bret.Johnson
  65. INET: Bret.Johnson@p1.f1110.n226.z1.FIDONET.ORG
  66.