home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.dcom.sys.cisco
- Path: sparky!uunet!boulder!recnews
- From: Bob Albrightson <albright@lager.cisco.com>
- Subject: Re: Problems hooking Cisco to T1 line
- In-Reply-To: Your message of 19 Aug 92 14:46:17 GMT
- Message-ID: <CMM.0.90.2.714249485.albright@lager.cisco.com>
- Sender: news@colorado.edu
- Date: 19 Aug 92 11:38:05 PDT
- Lines: 11
-
- > Our Cisco are running 8.2(4) and 8.2(3). We have an RS449 (Cisco end) to
- > 25 ping connector (DB25 I think) made up to GTE's spec. If anyone has any
- > insight as to what might be going wrong or set up incorrectly I would
- > greatly appreciate it.
-
- What does the output of 'show controller mci' show?
-
- Another possibility is you are not satisfying the ones density
- requirement for the circuit.
-
- -bob
-