home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!dtix!relay!nswc.navy.mil!rhott
- From: rhott@nswc.navy.mil (The VolleyDog - E41)
- Newsgroups: comp.dcom.sys.cisco
- Subject: MTU for Ethernet Interface
- Message-ID: <1992Aug14.142757.4230@relay.nswc.navy.mil>
- Date: 14 Aug 92 14:27:57 GMT
- Sender: news@relay.nswc.navy.mil
- Organization: NAVAL SURFACE WARFARE CENTER
- Lines: 14
-
- Is it possible to change the Ethernet MTU on an AGS (or and AGS+)?
-
- I looked in the manual and one can change the "ip mtu" but it does not
- appear to cause any fragmentation through the router. The show interface
- still shows the ethernet mtu as 1500 (as it should) and the show ip interface
- shows the ip mtu as whatever you change it to! Does the IP MTU only come
- into play when communicating with the cisco?
-
- Thanks.
- Bob
- ====================== #include <std/disclaimer.h> =========================
- Bob Hott, NSWCDD, Networks Branch (Code E41) |"If man were not meant to play
- Dahlgren, Virginia 22448 (703) 663 - 4447 | volleyball, why are there so
- rhott@relay.nswc.navy.mil | many beaches?" - Bob Hott -
-