Liren Large Software Subsidy 13

home *** CD-ROM | disk | FTP | other *** search

/ Liren Large Software Subsidy 13 / 13.iso / p / p115 / 1.ddi / GCD4 / INSTALL / CONFIG.HLP < prev next >

Wrap

Text File | 1989-11-20 | 36.8 KB | 668 lines

"CNFG_MN" 1 "Edit Drawing/System Parameters" "CNFG_MN" 1 "Press <Enter> to modify the drawing and system parameters" "CNFG_MN" 2 "Install/Re-install Computervision Supported Hardware Devices" "CNFG_MN" 2 "Press <Enter> to select Install/Re-install Hardware Devices" "CNFG_MN" 2 "This screen lists the currently installed devices. You" "CNFG_MN" 2 "can use this list as a reference, for installation or" "CNFG_MN" 2 "editing the parameters" "CNFG_MN" 3 "Install/Re-install Third Party Supported Hardware Devices" "CNFG_MN" 3 "Press <Enter> to select Install/Re-install Hardware Devices" "CNFG_MN" 3 "This screen lists the currently installed devices. You" "CNFG_MN" 3 "can use this list as a reference, for installation or" "CNFG_MN" 3 "editing the parameters" "CNFG_MN" 4 "Units conversion: Inches, Centimeters or Millimeters" "CNFG_MN" 4 "Press <Enter> to access Database Units Conversion" "CNFG_MN" 5 "Edit/Build Support Files" "CNFG_MN" 5 "Press <Enter> to Build or dump support files" "CNFG_MN" 6 "Exit to DOS" "M_UNITS" 1 "Press <Enter> to select configuration values in Inches" "M_UNITS" 2 "Press <Enter> to select configuration values in Centimeters" "M_UNITS" 3 "Press <Enter> to select configuration values in Millimeters" "M_UNITS" 4 "This field indicates to which file the current gcd.cfg" "M_UNITS" 4 "configuration file is copied. To change the filename" "M_UNITS" 4 "simply type the name you wish to use. Note: any changes" "M_UNITS" 4 "made to this file will not appear in new file." "BLDSUP" 1 "Tablet Menu File:" "BLDSUP" 2 "On-screen Menu Definition File:" "BLDSUP" 3 "Verb/Noun Command Table:" "BLDSUP" 4 "Keyboard Macro Definition File:" "BLDSUP" 5 "Modifier Table:" "BLDSUP" 6 "Prompts/Message File:" "DEVICES" 1 "Graphics Adaptor:" "DEVICES" 1 "Press <Enter> to install the graphics device files and/or" "DEVICES" 1 "edit the color value tables" "DEVICES" 2 "Digitize/Mouse:" "DEVICES" 2 "Here, you can choose the type of tablet or mouse you want" "DEVICES" 2 "to use. You can then determine the port numbers for the" "DEVICES" 2 "digitizer or mouse, the number of buttons on the stylus, or" "DEVICES" 2 "the attributes of the mouse." "DEVICES" 2 "Press <Enter> to install the input device files and/or" "DEVICES" 2 "edit the input device parameters" "DEVICES" 3 "obsolete - used to be I/O driver" "DEVICES" 4 "Plotter:" "DEVICES" 4 "Press <Enter> to install the plotter device files and/or" "DEVICES" 4 "edit the plotter parameters and the plotter pen file" "INPUT" 1 "Kurta IS/One Tablet (Series One)" "INPUT" 1 "Press <Enter> to install the Kurta IS/One Tablet" "INPUT" 2 "Kurta IS/Three Tablet (Series Three)" "INPUT" 2 "Press <Enter> to install the Kurta IS/Three Tablet" "INPUT" 3 "SummaSketch Tablet" "INPUT" 3 "Press <Enter> to install the SummaSketch Tablet" "INPUT" 4 "General tablet driver (5 or 6 byte packed binary format)" "INPUT" 4 "Calcomp 2300, GTCO, Numonics, Scriptel" "INPUT" 4 "Press <Enter> to install the General tablet driver" "INPUT" 5 "Microsoft Bus Mouse/IBM mouse with DOS installed driver" "INPUT" 5 "Press <Enter> to install the Microsoft/IBM Mouse" "INPUT" 6 "Microsoft Serial Mouse" "INPUT" 6 "Press <Enter> to install the Microsoft Serial Mouse" "INPUT" 7 "Mouse Systems Serial Mouse" "INPUT" 7 "Press <Enter> to install the Mouse Systems Mouse" "INPUT" 8 "Logitech Serial Mouse" "INPUT" 8 "Press <Enter> to install the Logitech Mouse" "INPUT" 9 "Benson 6301 Tablet (large-scale)" "INPUT" 9 "Press <Enter> to install the Benson 6301 Tablet" "INPUT" 10 "Calcomp 9100 Tablet (large-scale)" "INPUT" 10 "Press <Enter> to install the Calcomp 9100 Tablet" "DIGIT" 1 "Digitizer COM port Number (1 = COM1, 2 = COM2):" "DIGIT" 1 "Number of the communications port configured to access the" "DIGIT" 1 "tablet" "DIGIT" 2 "Number of pushes on stylus to validate digitize:" "DIGIT" 3 "Number of buttons on stylus:" "DIGIT" 4 "Digitizer input wait loop counter:" "DIGIT" 5 "Number of Digitizer units to consider position change" "DIGIT" 6 "Digitizer units per inch (resolution):" "DIGIT" 6 "Value for tablet resolution. Determine the value by the: "DIGIT" 6 "byte format:" "DIGIT" 6 " 5-byte format = actual resolution" "DIGIT" 6 " 6-byte format = 1/2 the actual resolution" "DIGIT" 7 "Digitizer X active area in digitizer units:" "DIGIT" 7 "Value that matches tablet size. Determine the correct" "DIGIT" 7 "value by multiplying the digitizer units per inch times" "DIGIT" 7 "the number of inches of active tablet in the horizontal" "DIGIT" 7 "dimension" "DIGIT" 8 "Digitizer Y active area in digitizer units:" "DIGIT" 8 "Value that matches tablet size. Determine the correct" "DIGIT" 8 "value by multiplying the digitizer units per inch times" "DIGIT" 8 "the number of inches of active tablet in the vertical" "DIGIT" 8 "dimension" "DIGIT" 9 "Digitizer RTS flag:" "DIGIT" 10 "Digitizer byte format (5 = 5 byte, 6 = 6 byte):" "DIGIT" 10 "Value to indicate whether you are using 5-byte or 6-byte" "DIGIT" 10 "packed binary format" "MOUSE" 1 "Mouse COM port Number (1 = COM1, 2 = COM2):" "MOUSE" 1 "Number of the communications port configured to access the" "MOUSE" 1 "mouse" "MOUSE" 2 "Left button (button number or ASCII code):" "MOUSE" 2 "Options:" "MOUSE" 2 " 1 = ASCII code" "MOUSE" 2 " 2 = Button number" "MOUSE" 3 "Right button(button number or ASCII code):" "MOUSE" 3 "Options:" "MOUSE" 3 " 1 = ASCII code" "MOUSE" 3 " 2 = Button number" "MOUSE" 4 "Middle button (button number or ASCII code):" "MOUSE" 4 "Options:" "MOUSE" 4 " 1 = ASCII code" "MOUSE" 4 " 2 = Button number" "MOUSE" 5 "Number of mouse units to consider position change:" "MOUSE" 6 "Mouse Units per inch (resolution)" "MOUSE" 7 "Mouse X,Y active area in mouse units:" "PLOT_SEL" 1 "Benson Series 16 (A/A4-E/AO)" "PLOT_SEL" 1 "Press <Enter> to install the Benson 1625" "PLOT_SEL" 1 "In GCD, Type PLOT BEN1625" "PLOT_SEL" 2 "Calcomp 907" "PLOT_SEL" 2 "Press <Enter> to install the Calcomp 907" "PLOT_SEL" 2 "In GCD, Type PLOT CAL907" "PLOT_SEL" 3 "Calcomp 960 (A-E)" "PLOT_SEL" 3 "Calcomp 1043 Series" "PLOT_SEL" 3 "Calcomp 1044 Series" "PLOT_SEL" 3 "CVP1000" "PLOT_SEL" 3 "Press <Enter> to install the Calcomp 960, 1043, 1044" "PLOT_SEL" 3 "In GCD, Type PLOT CAL960" "PLOT_SEL" 4 "Houston Instruments D size DMP41" "PLOT_SEL" 4 "Houston Instruments D size DMP50" "PLOT_SEL" 4 "Houston Instruments D size DMP51" "PLOT_SEL" 4 "Houston Instruments D size DMP52" "PLOT_SEL" 4 "Press <Enter> to install the Houston Instruments plotter" "PLOT_SEL" 4 "In GCD, Type PLOT HIDMP50" "PLOT_SEL" 5 "Houston Instruments E size DMP56" "PLOT_SEL" 5 "Press <Enter> to install the Houston Instruments plotter" "PLOT_SEL" 5 "In GCD, Type PLOT HIDMP56" "PLOT_SEL" 6 "Houston Instruments E size DMP61" "PLOT_SEL" 6 "Press <Enter> to install the Houston Instruments plotter" "PLOT_SEL" 6 "In GCD, Type PLOT HIDMP61" "PLOT_SEL" 7 "Houston Instruments E size DMP62" "PLOT_SEL" 7 "Press <Enter> to install the Houston Instruments plotter" "PLOT_SEL" 7 "In GCD, Type PLOT HIDMP62" "PLOT_SEL" 8 "Houston Instruments B Size PC695" "PLOT_SEL" 8 "Press <Enter> to install the Houston Instruments plotter" "PLOT_SEL" 8 "In GCD, Type PLOT HIPC695" "PLOT_SEL" 9 "Ioline LP3700 (A-E)" "PLOT_SEL" 9 "Press <Enter> to install the Ioline" "PLOT_SEL" 9 "In GCD, Type PLOT IOL3700" "PLOT_SEL" 10 "Ioline LP4000 (A-E)" "PLOT_SEL" 10 "Press <Enter> to install the Ioline" "PLOT_SEL" 10 "In GCD, Type PLOT IOL4000" "PLOT_SEL" 11 "Hewlett-Packard 7470A size A" "PLOT_SEL" 11 "Press <Enter> to install the Hewlett-Packard 7470A" "PLOT_SEL" 11 "In GCD, Type PLOT HP7470A" "PLOT_SEL" 12 "Hewlett-Packard 7475A size B" "PLOT_SEL" 12 "Press <Enter> to install the Hewlett-Packard plotter" "PLOT_SEL" 12 "In GCD, Type PLOT HP7475A" "PLOT_SEL" 13 "Hewlett-Packard 7550 size B" "PLOT_SEL" 13 "Press <Enter> to install the Hewlett-Packard plotter" "PLOT_SEL" 13 "In GCD, Type PLOT HP7550" "PLOT_SEL" 14 "Hewlett-Packard 7580B size D" "PLOT_SEL" 14 "Press <Enter> to install the Hewlett-Packard 7580B" "PLOT_SEL" 14 "In GCD, Type PLOT HP7580B" "PLOT_SEL" 15 "Hewlett-Packard 7585B size E" "PLOT_SEL" 15 "Hewlett-Packard 7586B size E" "PLOT_SEL" 15 "Press <Enter> to install the Hewlett-Packard 7585B/7586B" "PLOT_SEL" 15 "In GCD, Type PLOT HP7585B" "PLOT_SEL" 16 "Hewlett-Packard 7570A (DraftPro) size D" "PLOT_SEL" 16 "Press <Enter> to install the Hewlett-Packard 7570A" "PLOT_SEL" 16 "In GCD, Type PLOT HPDP" "PLOT_SEL" 17 "Hewlett-Packard 7595A (DraftMaster) size E" "PLOT_SEL" 17 "Press <Enter> to install the Hewlett-Packard 7595A" "PLOT_SEL" 17 "In GCD, Type PLOT HPDM" "PLOT_SEL" 18 "Postscript output device" "PLOT_SEL" 18 "Press <Enter> to install the Postscript Driver" "PLOT_SEL" 18 "In GCD, Type PLOT PSCRIPT" "PLOT_SEL" 19 "None" "PLOT_SEL" 19 "If you have installed plotters, but now wish to have no" "PLOT_SEL" 19 "plotters installed, select this menu field" "PLOT_SEL" 19 "Press <Enter> to select no plotters" "PLOTR_1" 1 "Plotter COM port number (1 = COM1, 2 = COM2):" "PLOTR_1" 2 "Minimum pen number:" "PLOTR_1" 3 "Maximum pen number:" "PLOTR_1" 4 "Optimize pen changing ( 1 = yes, 0 = no):" "PLOTR_1" 5 "Optimize pen movement ( 1 = yes, 0 = no):" "PLOTR_1" 6 "X axis plotter units per inch:" "PLOTR_1" 7 "Y axis plotter units per inch:" "PLOTR_1" 8 "Maximum pen speed value:" "SHEET_SZ" -1 "X and Y values are in plotter units specific to each" "SHEET_SZ" -1 "plotter. Please read your plotter manual for more" "SHEET_SZ" -1 "information." "PLOT_PEN" 1 "Black 0:" "PLOT_PEN" 2 "Red 1:" "PLOT_PEN" 3 "Green 2:" "PLOT_PEN" 4 "Blue 3:" "PLOT_PEN" 5 "Yellow 4:" "PLOT_PEN" 6 "Cyan 5:" "PLOT_PEN" 7 "Magenta 6:" "PLOT_PEN" 8 "Gray 7:" "PLOT_PEN" 9 "Dk Gray 8:" "PLOT_PEN" 10 "Lt Red 9:" "PLOT_PEN" 11 "Lt Green 10:" "PLOT_PEN" 12 "Lt Blue 11:" "PLOT_PEN" 13 "Lt Yellow 12:" "PLOT_PEN" 14 "Lt Cyan 13:" "PLOT_PEN" 15 "Lt Magenta 14:" "PLOT_PEN" 16 "White 15:" "MEM_SEL" 1 "DOS Memory I/O" "MEM_SEL" 1 "Press <Enter> to install the DOS Memory I/O" "MEM_SEL" 1 "(Disables GCD DOS Shell Command)" "MEM_SEL" 2 "Expanded Memory I/O" "MEM_SEL" 2 "Press <Enter> to install the Expanded Memory I/O" "MEM_SEL" 3 "Standard File I/O" "MEM_SEL" 3 "Press <Enter> to install the Standard File I/O" "MEM_PRM" 1 "Number of 16K Memory Pages to allocate:" "MEM_PRM" 2 "Number of bytes in RAM for MIB data:" "MEM_PRM" 3 "Number of bytes in RAM for PDF data:" "MEM_PRM" 4 "Number of bytes in RAM for Entity List:" "GRAPHICS" 1 "IBM PG Graphics Adaptor" "GRAPHICS" 1 "Press <Enter> to install the IBM PG Graphics Adaptor" "GRAPHICS" 2 "IBM VGA Graphics Adaptor (640 x 480)" "GRAPHICS" 2 "Press <Enter> to install the IBM VGA Graphics Adaptor" "GRAPHICS" 3 "4D Graphics Extended VGA driver (1024 x 800)" "GRAPHICS" 3 "Press <Enter> to install the 4D Graphics Extended VGA driver" "GRAPHICS" 4 "IBM 8514/A Graphics Adaptor" "GRAPHICS" 4 "Press <Enter> to install the IBM 8514/A Graphics Adaptor" "GRAPHICS" 4 "Make sure you follow the installation instructions" "GRAPHICS" 4 "provided with the 8514/A for proper operation." "GRAPHICS" 5 "VMI IM640 (CV Advanced Graphics, VMI8820/21)" "GRAPHICS" 5 "Press <Enter> to install the Vermont Microsystems IM640" "GRAPHICS" 6 "VMI IM1024 (VMI8825)" "GRAPHICS" 6 "Press <Enter> to install the Vermont Microsystems IM1024" "GRAPHICS" 7 "Pixelworks Clipper 1280" "GRAPHICS" 7 " with Display lists in Expanded Memory - buffered" "GRAPHICS" 7 "Press <Enter> to install the Pixelworks Clipper 1280" "GRAPHICS" 8 "Pixelworks Clipper 1280 (Non-Display list) "GRAPHICS" 8 "Press <Enter> to install the Pixelworks Clipper 1280" "GRAPHICS" 9 "DGIS Graphics Driver" "GRAPHICS" 9 "Press <Enter> to install the DGIS Graphics Driver" "GRAPHICS" 10 "IBM B&W CGA Graphics Adaptor" "GRAPHICS" 10 "Press <Enter> to install the IBM CGA Graphics Adaptor" "GRAPHICS" 11 "IBM EGA Graphics Adaptor" "GRAPHICS" 11 "Press <Enter> to install the IBM EGA Graphics Adaptor" "GRAPHICS" 12 "Compaq 640 by 400 Plasma Graphics Adaptor" "GRAPHICS" 12 "Press <Enter> to install the Compaq Plasma Graphics Adaptor" "GRAPHICS" 13 "Vermont Microsystems Display List Driver" "GRAPHICS" 13 "Press <Enter> to install the VMI Display List Driver" "GRAPHICS" 13 "Before using this driver, insert your COBRA PLUS Utilities/" "GRAPHICS" 13 "Driver diskette and type "A:\INSTALLV" for automatic" "GRAPHICS" 13 "installation of your Cobra Plus Basic Device Software" "GRAPHICS" 14 "Vermont Microsystems Non-Display List Driver" "GRAPHICS" 14 "Press <Enter> to install the VMI Non-Display List Driver" "GRAPHICS" 14 "Before using this driver, insert your COBRA PLUS Utilities/" "GRAPHICS" 14 "Driver diskette and type "A:\INSTALLV" for automatic" "GRAPHICS" 14 "installation of your Cobra Plus Basic Device Software" "COLOR1" 1 "For each RGB value enter a hexidecimal value (1-F)" "COLOR1" 2 "For each RGB value enter a hexidecimal value (1-F)" "COLOR1" 3 "For each RGB value enter a hexidecimal value (1-F)" "COLOR1" 4 "For each RGB value enter a hexidecimal value (1-F)" "COLOR1" 5 "For each RGB value enter a hexidecimal value (1-F)" "COLOR1" 6 "For each RGB value enter a hexidecimal value (1-F)" "COLOR1" 7 "For each RGB value enter a hexidecimal value (1-F)" "COLOR1" 8 "For each RGB value enter a hexidecimal value (1-F)" "COLOR1" 9 "For each RGB value enter a hexidecimal value (1-F)" "COLOR1" 10 "For each RGB value enter a hexidecimal value (1-F)" "COLOR1" 11 "For each RGB value enter a hexidecimal value (1-F)" "COLOR1" 12 "For each RGB value enter a hexidecimal value (1-F)" "COLOR1" 13 "For each RGB value enter a hexidecimal value (1-F)" "COLOR1" 14 "For each RGB value enter a hexidecimal value (1-F)" "COLOR1" 15 "For each RGB value enter a hexidecimal value (1-F)" "COLOR1" 16 "For each RGB value enter a hexidecimal value (1-F)" "COLOR2" 1 "For each RGB value enter a hexidecimal value (1-F)" "COLOR2" 2 "For each RGB value enter a hexidecimal value (1-F)" "COLOR2" 3 "For each RGB value enter a hexidecimal value (1-F)" "COLOR2" 4 "For each RGB value enter a hexidecimal value (1-F)" "COLOR2" 5 "For each RGB value enter a hexidecimal value (1-F)" "COLOR2" 6 "For each RGB value enter a hexidecimal value (1-F)" "COLOR2" 7 "For each RGB value enter a hexidecimal value (1-F)" "COLOR2" 8 "For each RGB value enter a hexidecimal value (1-F)" "COLOR2" 9 "For each RGB value enter a hexidecimal value (1-F)" "COLOR2" 10 "For each RGB value enter a hexidecimal value (1-F)" "COLOR2" 11 "For each RGB value enter a hexidecimal value (1-F)" "COLOR2" 12 "For each RGB value enter a hexidecimal value (1-F)" "COLOR2" 13 "For each RGB value enter a hexidecimal value (1-F)" "COLOR2" 14 "For each RGB value enter a hexidecimal value (1-F)" "COLOR2" 15 "For each RGB value enter a hexidecimal value (1-F)" "COLOR2" 16 "For each RGB value enter a hexidecimal value (1-F)" "DRAWING" 1 "Edit Support File List" "DRAWING" 1 "Support file are files containing menus, macros, and help" "DRAWING" 1 "screens. The support file list gives you the names of all" "DRAWING" 1 "current default files. " "DRAWING" 1 "Use this screen as a reference or to change the file name" "DRAWING" 2 "Edit Graphics Cursor Parameters" "DRAWING" 3 "Edit Default Text Parameters" "DRAWING" 4 "Edit General System Parameters" "DRAWING" 5 "Edit System Color Value Assignments" "DRAWING" 6 "Edit Default Dimension Parameters" "DRAWING" 7 "Edit Software-Based Line Font Definition" "DRAWING" 7 "Soft line fonts are plotting fonts defined by the software," "DRAWING" 7 "not the hardware. You can define special line" "DRAWING" 7 "patterns that do not exist as hard line fonts. Typically," "DRAWING" 7 "you use soft fonts when you want to plot a drawing, but" "DRAWING" 7 "not while working on the part" "DRAWING" 7 "Computervision supplies 6 soft fonts. You can create up to" "DRAWING" 7 "15 soft line fonts by adding lines to the configuration" "DRAWING" 7 "file. You can also edit the six line fonts include in this" "DRAWING" 7 "file. Each font definition consists of a series of numbers" "DRAWING" 7 "that specifiy the length of a line or a gap. The unit of " "DRAWING" 7 "measurement is a pixel. The number of values in the series" "DRAWING" 7 "varies according to the pattern of the line font. " "DRAWING" 7 "You define one segment of the font" "DRAWING" 7 "Font definitions begin with the initial segment length. " "DRAWING" 7 "The next values followed by two shorter spaces and lines." "DRAWING" 7 "------ --- ---" "DRAWING" 7 "The font definition creates a line pattern" "DRAWING" 7 "------ --- --- ------ --- --- "DRAWING" 7 "Refer to the microCADDS Rev 4.00 Reference Manual" "DRAWING" 8 "Edit Network parameters" "SUPPRT1" 1 "Max number of bytes to allocate for memory IO system." "SUPPRT1" 1 "This value should be set to approximately the amount of memory" "SUPPRT1" 1 "you have in your system minus about 2000000. If it is set too" "SUPPRT1" 1 "small (less than 100000) the system will become very slow. If" "SUPPRT1" 1 "it is set too big it will create a large virtual memory file" "SUPPRT1" 1 "on your hard disk. It would be very rare to for GCD to use" "SUPPRT1" 1 "more than 3 to 4 meg of memory." "SUPPRT1" 2 "Tablet Menu File:" "SUPPRT1" 2 "Binary file containing data on the format and functions of" "SUPPRT1" 2 "the tablet and tablet menu" "SUPPRT1" 3 "Color/Pen Table:" "SUPPRT1" 3 "Assigns colors and speeds to plotter pens" "SUPPRT1" 4 "On-screen Menu Definition File:" "SUPPRT1" 4 "Binary file conatining information on the screen layout and" "SUPPRT1" 4 "the on-screen menus." "SUPPRT1" 5 "Graphics Text Font Definition File:" "SUPPRT2" 1 "MIB Overflow Temporary File:" "SUPPRT2" 1 "File name to write MIB info to if memory overflows." "SUPPRT2" 2 "MIB Number of Fast Bytes:" "SUPPRT2" 2 "Sets the amount of memory to allocate in memory IO system" "SUPPRT2" 3 "PDF Overflow Temporary File:" "SUPPRT2" 3 "File name to write PDF info to if memory overflows." "SUPPRT2" 4 "PDF Number of Fast Bytes:" "SUPPRT2" 4 "Sets the amount of memory to allocate in memory IO system" "SUPPRT2" 5 "Entity List Overflow Temporary File:" "SUPPRT2" 5 "File name to write Entity List to if memory overflows." "SUPPRT2" 6 "Entity List Number of Fast Bytes" "SUPPRT2" 6 "Sets the amount of memory to allocate in memory IO system" "SUPPRT3" 1 "Get Data Command Table:" "SUPPRT3" 1 "Table of locations and objects used in the second portion" "SUPPRT3" 1 "of a GCD command" "SUPPRT3" 2 "Verb/Noun Command Table:" "SUPPRT3" 2 "Binary file that determines the syntax (verbs and nouns)" "SUPPRT3" 2 "for each micrCADDS command." "SUPPRT3" 3 "Modifier Table:" "SUPPRT3" 4 "Keyboard Macro Definition File:" "SUPPRT3" 4 "Redefines your keyboard and defines keyboard macros." "SUPPRT3" 5 "UNDO Transaction Temporary:" "SUPPRT4" 1 "Startup UPL Program" "SUPPRT4" 2 "Memory Resident UPL code size" "SUPPRT4" 2 "Minimum number of bytes to reserve in IO system for UPL" "SUPPRT4" 2 "code. If UPL is not allocated enough bytes it will" "SUPPRT4" 2 "severly impact the execution speed of UPL programs." "SUPPRT4" 3 "Prompts/Message File:" "SUPPRT4" 3 "Binary file that determines the prompts and messages" "SUPPRT4" 3 "that the system issues when you are in the processor" "SUPPRT4" 3 "portion of a microCADDS command." "SUPPRT4" 4 "Help Message File:" "SUPPRT4" 4 "Binary file that provides on-line documentation" "CURSOR" 1 "Size of crosshair in X dimension (screen inches)" "CURSOR" 2 "Size of crosshair in Y dimension (screen inches)" "CURSOR" 3 "Menu cursor size (1 - 8)" "CURSOR" 4 "Menu cursor style:" "CURSOR" 5 "On-screen menu cell highlighting on (0 = no, 1 = yes)" "CURSOR" 6 "Crosshair position display update rate:" "CURSOR" 7 "Crosshair update speed:" "TEXT" 1 "Text height (HGT):" "TEXT" 1 "Specifies the height of a line of text" "TEXT" 2 "Text width (WDT):" "TEXT" 2 "Specifies the width of each character" "TEXT" 3 "Line spacing (LNSP):" "TEXT" 3 "Specifies the number line spaces from the base of one line" "TEXT" 3 "of text to the base of the next line" "TEXT" 4 "Minimum displayed text height (screen inches):" "TEXT" 5 "Text display On/Off (0 = On, 1 = Off):" "TEXT" 5 "0 = On, causes text to appear on screen" "TEXT" 5 "1 = Off, removes text from screen and marks its place with" "TEXT" 5 " a box" "TEXT" 6 "Text angle (ANG):" "TEXT" 6 "Specifies the angle of the text" "TEXT" 7 "Justification (1 = left, 2 = right, 3 = center):" "TEXT" 7 "1 = LJT (left justify)," "TEXT" 7 " lines up the left margin of all text" "TEXT" 7 "2 = RJT (right justify), " "TEXT" 7 " lines up the right margin of each line of text" "TEXT" 7 "3 = CJT (center justify), centers each line of text around" "TEXT" 7 " the point of origin of the text" "TEXT" 8 "Default View Visibility (1=construction plane, 0=All):" "TEXT" 8 "Modifiers that determine visibility:" "TEXT" 8 "1 = VALL (view all), displays the dimension in all views" "TEXT" 8 "2 = VCON (view construction), displays the dimension only" "TEXT" 8 " in the view in which it was inserted" "GENERAL1" 1 "Database packing (0=Do not pack, 1=pack, 2=ask user)" "GENERAL1" 1 "System function that reorganizes data in the database and" "GENERAL1" 1 "fills empty spaces created by deletions and edits" "GENERAL1" 2 "UPL startup program active (0=no, 1=yes)" "GENERAL1" 2 "Determines whether to execute a startup UPL program" "GENERAL1" 2 "upon entering GCD. Use the Edit Support File List option" "GENERAL1" 2 "from the Drawing/System Parameters menu to set the" "GENERAL1" 2 "file name of the startup program." "GENERAL1" 3 "Line font type (0=soft font, 1=hard font)" "GENERAL1" 3 "Determines whether a change in scale affects a line font." "GENERAL1" 3 "You can also set this parameter by using SELECT FONT with" "GENERAL1" 3 "the modifier HARD or SOFT. Use the Edit Software-Based" "GENERAL1" 3 "Line Font Definition option from the Edit Drawing/System" "GENERAL1" 3 "Parameter to edit soft font line patterns" "GENERAL1" 4 "Figure/symbol update flag (0=no update, 1=update, 2=ask)" "GENERAL1" 4 "Instructs system whether to prompt you as you enter" "GENERAL1" 4 "a drawing that contains figures that have changed since" "GENERAL1" 4 "the last time you entered the drawing" "GENERAL1" 5 "Crosshair type (1=normal, 4=rubberband)" "GENERAL1" 5 "Controls the rubberband effect, the display of a line from" "GENERAL1" 5 "the last digitize to the current stylus location on screen" "GENERAL1" 6 "Messages flag (0=normal, 1=debug, 2=number, 3=off)" "GENERAL1" 6 "Sets error and response message content." "GENERAL1" 7 "On-screen menu display (0=off, 1= on)" "GENERAL1" 7 "Instructs system whether to turn on or off the on-screen" "GENERAL1" 7 "menus. You can also control the menu displays with the" "GENERAL1" 7 "SELECT MENU command plus the ON or OFF modifier" "GENERAL1" 8 "Display X,Y cursor position (0=no, 1=yes):" "GENERAL1" 8 "Instructs system to turn on or off the display of the" "GENERAL1" 8 "coordinate location of the cursor. You can also use the" "GENERAL1" 8 "command SELECT COORDINATE plus the modifier ON or OFF to" "GENERAL1" 8 "control the display of the cursor" "GENERAL1" 9 "Undo capability enabled flag (0=no, 1=yes):" "GENERAL1" 9 "Turns on or off the SELECT UNDO function, which backs up" "GENERAL1" 9 "through a process to delete one step at a time" "GENERAL1" 10 "Disable AV rubber band cursor snapping,(1=yes, 0=no)" "GENERAL1" 10 "Controls the display of rubber band cursor between AV's" "GENERAL2" 1 "Figures ident flag controls identing of a figure in it's" "GENERAL2" 1 "extents or sub-figure entity only" "GENERAL2" 2 "Default ZOOM ALL percentage:" "GENERAL2" 2 "Specifies by what factor the current screen image" "GENERAL2" 2 "increases or decreases when you use the microCADDS ZOOM" "GENERAL2" 2 "commands" "GENERAL2" 3 "Global scale factor:" "GENERAL2" 3 "Basic unit of measure defined relative to an inch;" "GENERAL2" 3 "provides the system with correct ratio for plotting your" "GENERAL2" 3 "drawing in the desired units of measure as well as screen" "GENERAL2" 3 "display. This only changes database units, not default" "GENERAL2" 3 "text heights, etc..." "GENERAL2" 3 "See Units Conversion menu for global conversions." "GENERAL2" 4 "Default chord height tolerance (screen inches)" "GENERAL2" 4 "Determines the degree of smoothness of an arc or curve" "GENERAL2" 4 "when displaying it. A smaller value generates a smoother" "GENERAL2" 4 "curve when displaying it." "GENERAL2" 5 "Default trap distance (screen inches):" "GENERAL2" 5 "Specifies the farthest allowable distance between the" "GENERAL2" 5 "point you digitize and the entity or location you are" "GENERAL2" 5 "specifying. Imagine the trap distance as a square" "GENERAL2" 5 "around the entity or location you want to identify." "GENERAL2" 5 "Any point you digitize inside that circle can identify" "GENERAL2" 5 "the entity or location. If there are many entities within" "GENERAL2" 5 "the trap distance microCADDS selects one of the entities." "GENERAL2" 5 "If you have difficulty selecting entities, change the" "GENERAL2" 5 "trap size or use the ZOOM WINDOW command to enlarge that" "GENERAL2" 5 "protion of the part you are working" "GENERAL2" 6 "Keyboard wait factor:" "GENERAL2" 6 "Determines the time between macro key strokes before they" "GENERAL2" 6 "are recognized as separate characters. The average wait" "GENERAL2" 6 "factor is 20" "GENERAL3" 1 "Grid spacing X direction" "GENERAL3" 1 "Distance between grid points along the X axis." "GENERAL3" 1 "This replaces using the command SELECT GRID with the" "GENERAL3" 1 "modifier X to set this within a drawing." "GENERAL3" 2 "Grid spacing Y direction" "GENERAL3" 2 "Distance between grid point along the Y axis." "GENERAL3" 2 "This replaces using the command SELECT GRID with the" "GENERAL3" 2 "modifier Y n to set this within a drawing." "GENERAL3" 3 "Grid origin X value:" "GENERAL3" 4 "Grid origin Y value:" "GENERAL3" 5 "Startup grid condition (0=off, 1=on):" "GENERAL3" 6 "Point entity size for graphics screen (screen inches):" "GENERAL3" 7 "Point entity size for plotter (inches):" "GENERAL3" 8 "Digitize marker size (screen inches):" "GENERAL3" 8 "Gleep marker, the X that appears on your screen when you" "GENERAL3" 8 "digitize; measured in decimal inches in relation to screen" "GENERAL4" 1 "Autofile Default File Name" "GENERAL4" 1 "Part name to use when system automatically files part" "GENERAL4" 2 "Autofile on/off flag (on = 1, off = 0)" "GENERAL4" 2 "Allows system to automatically file your part to a backup" "GENERAL4" 2 "part at user specified intervals." "GENERAL4" 3 "Number of Minutes between Autofiles" "GENERAL4" 4 "Number of Commands between Autofiles" "GENERAL4" 5 "Number of Entities to add before an Autofile" "SYSCLR1" 1 "Default entity color:" "SYSCLR1" 2 "Window entity box color:" "SYSCLR1" 3 "System text color:" "SYSCLR1" 3 "Defines the color of prompts and messages" "SYSCLR1" 4 "User text color:" "SYSCLR1" 4 "Defines the color of text you enter from the keyboard or" "SYSCLR1" 4 "tablet. Once in microCADDS, you can alter the default" "SYSCLR1" 4 "color for user text with the SELECT COLOR command" "SYSCLR1" 5 "Message text color;" "SYSCLR1" 6 "Warning message text color:" "SYSCLR1" 6 "Defines the color of the text in warning messages" "SYSCLR1" 7 "Error message text color:" "SYSCLR1" 7 "Defines the color of the text in error messages" "SYSCLR1" 8 "Help text color:" "SYSCLR1" 8 "Defines the color of the text in the on-line help system" "SYSCLR1" 9 "General window text color:" "SYSCLR2" 1 "Digitizer marker color:" "SYSCLR2" 1 "Defines the color of the gleep, the small X that appears" "SYSCLR2" 1 "each time you digitize in the graphics portion" "SYSCLR2" 1 "of the screen" "SYSCLR2" 2 "Normal crosshair color:" "SYSCLR2" 3 "Entity id" "SYSCLR2" 4 "On-screen menu cursor color:" "SYSCLR2" 4 "Defines the color of the cursor in the menu." "SYSCLR2" 5 "Edit menu selected box color:" "SYSCLR2" 5 "Defines the color used to highlight the box you digitize" "SYSCLR2" 5 "when using the EDIT MENU command" "SYSCLR2" 6 "Menu pick box highlight color:" "SYSCLR2" 7 "Crosshatch XY coord color:" "SYSCLR2" 8 "Grid color (quadrants ++, --):" "SYSCLR2" 8 "Assigns colors to pairs of opposite quadrants (++/--). Use" "SYSCLR2" 8 "a different color for each pair to differentiate between" "SYSCLR2" 8 "the X0, Y0 coordinates on your screen. Set both colors to" "SYSCLR2" 8 "black (0) to obtain an invisible grid. You can obtain the" "SYSCLR2" 8 "same result using the SEL GRID command with the POSColor" "SYSCLR2" 8 "and NEGColor modifiers" "SYSCLR2" 9 "Grid color (quadrants -+, +-):" "SYSCLR2" 9 "Assigns colors to pairs of opposite quadrants (-+/+-). Use" "SYSCLR2" 9 "a different color for each pair to differentiate between" "SYSCLR2" 9 "the X0, Y0 coordinates on your screen. Set both colors to" "SYSCLR2" 9 "black (0) to obtain an invisible grid. You can obtain the" "SYSCLR2" 9 "same result using the SEL GRID command with the POSColor" "SYSCLR2" 9 "and NEGColor modifiers" "DIMPRM1" 1 "Tolerance text height scale (THGHT):" "DIMPRM1" 1 "Specifies a number that is the ratio of tolerance text" "DIMPRM1" 1 "height to regular text height" "DIMPRM1" 2 "Minus tolerance value (MTOL):" "DIMPRM1" 2 "Specifies the negative value" "DIMPRM1" 3 "Plus tolerance value (PTOL):" "DIMPRM1" 3 "Specifies the positive value" "DIMPRM1" 4 "Both (equal) tolerance value (BTOL):" "DIMPRM1" 4 "Specifies one value for both tolerances" "DIMPRM1" 5 "Scaling value (SCL):" "DIMPRM1" 5 "Scales dimension value by a factor you specify" "DIMPRM1" 6 "Leader offset (OFFSET):" "DIMPRM1" 6 "Specifies the distance between extension lines and" "DIMPRM1" 6 "geometry (0.0 = Proportional to text height)" "DIMPRM1" 7 "Arrowhead size (ASIZE) (0.0 = Proportional to text height)" "DIMPRM1" 7 "Specifies the size of arrowheads" "DIMPRM1" 8 "Line spacing (LNSP):" "DIMPRM1" 8 "Specifies the number of line spaces between lines of text" "DIMPRM1" 9 "Dimension text width (WDT):" "DIMPRM1" 9 "Specifies the text width (0.0 = Proportional to text height)" "DIMPRM1" 10 "Dimension text height (HGT):" "DIMPRM1" 10 "Specifies the text height" "DIMPRM2" 1 "Dimension text angle (ANG):" "DIMPRM2" 1 "Specifies the angle at which you can display the dimension" "DIMPRM2" 1 "value or text" "DIMPRM2" 2 "Dimension type (TYPE):" "DIMPRM2" 2 "Specifies format of diameter and radius symbol dimensions" "DIMPRM2" 2 "1 = places text beside the leader with a leader tail" "DIMPRM2" 2 "2 = places text over the leader, with extension lines when" "DIMPRM2" 2 " outside the arc" "DIMPRM2" 3 "Tolerance precision (TPREC):" "DIMPRM2" 3 "Specifies the number of places to the right of the decimal" "DIMPRM2" 3 "point" "DIMPRM2" 4 "Dimension precision (PREC):" "DIMPRM2" 4 "Specifies number of places to right of dicmal point" "DIMPRM2" 5 "Arrowhead type (ATYPE)" "DIMPRM2" 5 "Sets the type of arrowhead to use in drawings" "DIMPRM2" 5 "0 = line without arrowheads "DIMPRM2" 5 "1 = narrow, filled arrowhead" "DIMPRM2" 5 "2 = line arrowhead" "DIMPRM2" 5 "3 = one-sided, line arrowhead" "DIMPRM2" 5 "4 = end-point" "DIMPRM2" 5 "5 = filled arrowhead" "DIMPRM2" 5 "6 = densely filled arrowhead" "DIMPRM2" 6 "Include leading zeros (1=Yes, 2=No):" "DIMPRM2" 7 "Include trailing zeros (1=Yes, 2=No):" "DIMPRM2" 7 "1 = TRAILZ, displays trailing zeros in a value." "DIMPRM2" 7 "2 = NOTRAILZ, " "DIMPRM2" 7 "suppresses trailing zeros in dimension value." "DIMPRM2" 8 "Decimal indicator (1=Point, 2=Comma):" "DIMPRM2" 8 "Specifies the type of punctuation mark in a" "DIMPRM2" 8 "decimal number." "DIMPRM2" 8 "1 = DPOINT, specifies decimal point in dimension value." "DIMPRM2" 8 "2 = COMMA, uses a comma in place of a decimal point" "DIMPRM2" 9 "Default unit flag (1=Feet, 2=Inch)" "DIMPRM2" 9 "1 = FEET, displays dimension values in feet and inches" "DIMPRM2" 9 "2 = INCH, displays dimension values in decimal inches" "DIMPRM2" 10 "Dimension Standard(1=ANSI,2=ISO/JIS,3=DIN)" "DIMPRM2" 10 "Determines format standard for dimenstions" "DIMPRM2" 10 "1 = American (ANSI)" "DIMPRM2" 10 "2 = International/Japanese (ISO/JIS)" "DIMPRM2" 10 "3 = German (DIS)" "DIMPRM3" 1 "Alignment (1=Align, 2=Do not align):" "DIMPRM3" 1 "1 = ALIG, lines up text with dimension line" "DIMPRM3" 1 "2 = NOALIG, places text along x-axis or along angle" "DIMPRM3" 1 "specified with ANG modifier." "DIMPRM3" 2 "Diameter indicator (1=Symbol, 2=Word):" "DIMPRM3" 2 "Specifies how to label the diameter in a drawing" "DIMPRM3" 2 "1 = DSYM, adds diameter symbol to value" "DIMPRM3" 2 "2 = DWORD, adds abbreviation DIA to value" "DIMPRM3" 3 "Diameter indicator location (1=Prefix, 2=Suffix, 3=None)" "DIMPRM3" 3 "Specifies where to place the diameter or radial notation" "DIMPRM3" 3 "1 = PREFIX, places diameter symbol or abbreviation" "DIMPRM3" 3 " DIA or R before diameter or radial dimension value" "DIMPRM3" 3 "2 = SUFFIX, places diameter symbol or abbreviation" "DIMPRM3" 3 " DIA or R after diameter or radial dimension value." "DIMPRM3" 3 "3 = NOSYM, suppresses diameter symbol or abbreviation" "DIMPRM3" 4 "Dimension text centering (1=Center, 2=Do not center)" "DIMPRM3" 4 "1 = CENT, automatically centers dimension text and value" "DIMPRM3" 4 " between extension lines when you digitize inside the" "DIMPRM3" 4 " extension lines." "DIMPRM3" 4 "2 = NOCENT, places dimension text and value wherever you" "DIMPRM3" 4 " digitize" "DIMPRM3" 5 "Tolerance type(0=None, 1=Limit, 2=or-, 3=+and-,4=Basic)" "DIMPRM3" 5 "Modifiers that suppress or display tolerance values." "DIMPRM3" 5 "0 = NOTOL (no tolerance), suppresses display of both" "DIMPRM3" 5 " tolerance values." "DIMPRM3" 5 "1 = LIMIT, adds the positive tolerance value to the" "DIMPRM3" 5 " dimension value and subtracts the negative value form" "DIMPRM3" 5 " it to display a maximum and minimum dimension value." "DIMPRM3" 5 "2 = ORTOL (+or-), displays one tolerance value in" "DIMPRM3" 5 " + or - format" "DIMPRM3" 5 "3 = ANDTOL(+AND-), displays the positive tolerance value" "DIMPRM3" 5 " above the negative tolerance value." "DIMPRM3" 5 "4 = BASIC, format standard modifier that places a box" "DIMPRM3" 5 " around a dimension value" "DIMPRM3" 6 "Justification(1=Auto justify, 2=Left justify):" "DIMPRM3" 7 "Arrowhead location(1=Inside, 2=Outside)" "DIMPRM3" 8 "Default dimension type(1=Pt-to-Pt, 2=Horiz, 3=Vert)" "DIMPRM3" 9 "Default view visibility(1=VALL, 2=VCON):" "DIMPRM3" 10 "Leader line suppression(1=both, 2=1st, 3=2nd, 4=none)" "DIMPRM3" 10 "Modifiers that suppress or display extension lines" "DIMPRM3" 10 "1 = BOTH, suppresses display of both extension lines" "DIMPRM3" 10 "2 = FIR, suppresses display of first extension line" "DIMPRM3" 10 "3 = SEC, suppresses display of the second extension line" "DIMPRM3" 10 "4 = NONE, displays both extension lines" "LN_FONT" 1 "Font One: Dotted" "LN_FONT" 2 "Font Two: Short Dash" "LN_FONT" 3 "Font Three: Long Dash" "LN_FONT" 4 "Font Four: Dash Dot" "LN_FONT" 5 "Font Four: Dash Dot" "LN_FONT" 6 "Font Five: Centerline (Long Dash/Short Dash)" "LN_FONT" 7 "Font Five: Centerline (Long Dash/Short Dash)" "LN_FONT" 8 "Font Six: Phantom (Long Dash/Double Short Dash)" "LN_FONT" 9 "Font Six: Phantom (Long Dash/Double Short Dash)" "LN_FONT" 10 "Font Six: Phantom (Long Dash/Double Short Dash)" "LN_FONT" 11 "Font One: Dotted" "LN_FONT" 12 "Font Two: Short Dash" "LN_FONT" 13 "Font Three: Long Dash" "LN_FONT" 14 "Font Four: Dash Dot" "LN_FONT" 15 "Font Four: Dash Dot" "LN_FONT" 16 "Font Five: Centerline (Long Dash/Short Dash)" "LN_FONT" 17 "Font Five: Centerline (Long Dash/Short Dash)" "LN_FONT" 18 "Font Six: Phantom (Long Dash/Double Short Dash)" "LN_FONT" 19 "Font Six: Phantom (Long Dash/Double Short Dash)" "LN_FONT" 20 "Font Six: Phantom (Long Dash/Double Short Dash)" "NETWORK" 1 "Network file locking enable flag, = 0 disable always" "NETWORK" 1 " = 1 enable always" "NETWORK" 1 " = 2 enable if network detected" "NETWORK" 2 "Node name flag, = 1 try to get name from system," "NETWORK" 2 " else use name provided below" "NETWORK" 2 " = 0 always use name provided below" "NETWORK" 3 "Ask for user name option, = 1 ask for name (not implemented)" "NETWORK" 3 " = 0 use name provided below" "NETWORK" 4 "Network Node name" "NETWORK" 5 "User name"