home *** CD-ROM | disk | FTP | other *** search
/ Liren Large Software Subsidy 13 / 13.iso / p / p069 / 2.img / CADMAIN1.LIF / CNPMPTS.TXT < prev    next >
Encoding:
Text File  |  1992-03-22  |  21.5 KB  |  482 lines

  1. 1 Choose menu option => 
  2. 11 Choose menu option (%d) => 
  3. 111      (%s) : 
  4. 11101 Graphics Device Selection
  5. 11102 Starting Segment = 0x%x
  6. 11103 %2d) %s
  7. 11104 PgDn for Next Page
  8. 11105 PgDn for Next Page, PgUp for Previous Page
  9. 11106 PgUp for Previous Page
  10. 11107 Enter device selection (%d) => 
  11. 11111 Graphics Device Mode Selection
  12. 11112 %2d) %d x %d, mono
  13. 11113 %2d) %d x %d, mono, %s
  14. 11114 %2d) %d x %d, %d colors
  15. 11115 %2d) %d x %d, %d colors, %s
  16. 11116 Enter mode selection (%d) => 
  17. 11117 %s
  18. 11121 Graphics Display Monitors
  19. 11122 %2d) %s
  20. 11123 %6.3f x %6.3f
  21. 11124 Enter monitor selection (%d) => 
  22. 11131 %2d) Enter screen dimensions
  23. 11132 The current screen dimensions are:
  24. 11133   horizontal size = %.3f in.
  25. 11134   vertical size   = %.3f in.
  26. 11135 Enter horizontal size of graphics display       (%.3f in.) => 
  27. 11136 Enter vertical size of graphics display         (%.3f in.) => 
  28. 11140 Enter the x size for the CADKEY graphics cursor   (%f in.) => 
  29. 11141 Enter the y size for the CADKEY graphics cursor   (%f in.) => 
  30. 11142 Enter the size for the CADKEY graphics marker     (%f in.) =>
  31. 11143 Enter the maximum number of horizontal and 
  32. 11144   vertical grid points                            (%d) =>
  33. 11145 Enter the maximum number of entities to display
  34. 11146   while dynamically rotating part                 (%d) =>
  35. 11147 Enter a value (1.0 to 5.0) for curve display, 
  36. 11148   where 5.0 is the smoothest. For faster drawing 
  37. 11149   and selection, use a coarser display.           (%.3f) => 
  38. 11150 Enter the minimum increment for sketching         (%f in.) =>
  39. 11151 'n' for Next Page
  40. 11152 'n' for Next Page, 'p' for Previous Page
  41. 11153 'p' for Previous Page
  42. 1121 The range for the current color graphics palette is 0-%d.
  43. 11201 Set Menu Options Window Colors
  44. 112011 Enter the border color             (%d) => 
  45. 112012 Enter the background color         (%d) => 
  46. 112013 Enter the text/draw color          (%d) => 
  47. 112014 Enter the border style:
  48. 112015   0 = none, 1 = single, 2 = double (%d) => 
  49. 11202 Set System Mode Indicator Colors
  50. 11203 Set Break Window Colors
  51. 11204 Set Status Window Colors
  52. 11205 Set History Line Colors
  53. 11206 Set Prompt Line Colors
  54. 11207 Set Cursor Tracking Window Colors
  55. 11208 Set Pop Up Menus Colors
  56. 11209 Set Viewport Area Colors
  57. 112091 Enter the border color for primary graphics viewport  (%d) => 
  58. 112092 Enter the border color for other graphics viewports   (%d) => 
  59. 112093 Enter the background color for all graphics viewports (%d) => 
  60. 112094 Enter the border style for all graphics viewports:
  61. 112095   0 = none, 1 = single, 2 = double                    (%d) => 
  62. 11210 Set Cursor and Marker Colors
  63. 112101 Enter the color for the CADKEY graphics cursor (%d) => 
  64. 112102 Enter the color for rubber banding             (%d) => 
  65. 112103 Enter the color for the CADKEY prompt marker   (%d) =>
  66. 1131 Set Viewport Options
  67. 1132 Enter maximum allowable number of viewports      (%d) =>
  68. 1133 Enter the spacing between viewports when using 
  69. 1134   automatic viewport placement options           (%f in.) =>
  70. 1135 Should display view axes appear in each viewport
  71. 1136   upon initial entry                                  (%c) ? 
  72. 1137 Choose display option for construction view axes
  73. 1138   upon initial entry                             (%d) =>
  74. 1141 Please enter the name of the graphics CDE to use (%s) => 
  75. 12000 CADKEY Input Device Selection
  76. 12001 CADL Input Device Selection
  77. 12002 none (keyboard cursor keys only)
  78. 12003 none (use CADKEY input device)
  79. 12100 Do you wish to redefine the tablet/mouse working area (%c) ? 
  80. 12101 Enter x dimension of tablet/mouse active area (%f in.) => 
  81. 12102 Enter y dimension of tablet/mouse active area (%f in.) => 
  82. 12103 Enter x min for cursor control area (%f in.) => 
  83. 12104 Enter y min for cursor control area (%f in.) => 
  84. 12105 Enter x max for cursor control area (%f in.) => 
  85. 12106 Enter y max for cursor control area (%f in.) => 
  86. 12107 Enter x min for function selection area (%f in.) => 
  87. 12108 Enter y min for function selection area (%f in.) => 
  88. 12109 Enter x max for function selection area (%f in.) => 
  89. 12110 Enter y max for function selection area (%f in.) => 
  90. 12111 Enter number of columns in the function area (%d) => 
  91. 12112 Enter number of rows in the function area    (%d) => 
  92. 12200 Do you wish to assign the cursor puck buttons (%c) ? 
  93. 12201 To assign functions to input device buttons:
  94. 12202   1) Use your input device to "point" to the desired function item.
  95. 12203   2) Press the input device button to which you wish to assign this
  96. 12204      function. (Some input devices also support combinations of buttons
  97. 12205      pressed simultaneously as additional "buttons".)
  98. 12206   3) Repeat step 2 for all buttons and button combinations to be assigned.
  99. 12207   4) Select "-VERIFY-" to check the value of a previously assigned button.
  100. 12208   5) Press RETURN when done.
  101. 12209 NOTE: If you do not have cursor control in this function, ensure proper
  102. 12210       connection of the input device and that you have chosen the correct
  103. 12211       input device configuration options.
  104. 12212                 BUTTON RETURN CODE: %2d        FUNCTION SELECTED: %8s
  105. 12213      VERIFY =>  BUTTON RETURN CODE: %2d        ASSIGNED FUNCTION: %8s
  106. 12214      Can't assign button: too many buttons
  107. 12215 Specify the device to which the input device is attached;
  108. 12216 If the driver for your mouse is loaded, please run CONFIG
  109. 12217 again and select Microsoft Mouse.  
  110. 12218 Now you must enter which device your mouse is attached 
  111. 12219 to.  Most users will enter COM1 or COM2 at this point.
  112. 13000 CADKEY Plotter Selection
  113. 13001 XXnone
  114. 13100 Choose plot paper size (%d) => 
  115. 13101 Enter plot paper X size in inches (%f) => 
  116. 13102 Enter plot paper Y size in inches (%f) => 
  117. 13200 The following clip limits correspond to the soft clip limits
  118. 13210 for the selected plotter. These will determine the plotting
  119. 13220 area used by the plotter. Refer to your plotter manual for 
  120. 13230 clip limits used by your plotter.
  121. 13240 Enter X min clip limit in millimeters (%f) =>
  122. 13250 Enter Y min clip limit in millimeters (%f) =>
  123. 13260 Enter X max clip limit in millimeters (%f) =>
  124. 13270 Enter Y max clip limit in millimeters (%f) =>
  125. 13300 CADKEY attempts to center plots on the paper, but some plotters
  126. 13301 automatically add a small offset. If you wish to compensate for
  127. 13302 this offset or if you do not wish to have a centered plot, use
  128. 13303 non-zero values for X and Y offsets. Note that offsets are
  129. 13304 expressed in terms of the units being plotted (in/mm) and are 
  130. 13305 independent of plotting scale.
  131. 13306 Enter X offset for plot (%f) => 
  132. 13307 Enter Y offset for plot (%f) => 
  133. 13400 Enter plotter pen width in mm (%f) => 
  134. 13500 Refer to your plotter manual for pen velocities supported by your
  135. 13501 plotter. Enter a value between 1 and the maximum speed supported.
  136. 13502 Enter value in cm/sec (%d) => 
  137. 13600 Do you wish to change the assignment of plot pens to CADKEY colors (%c) ? 
  138. 13601 Plotter pen numbers 1-16 are available for CADKEY color #%d.
  139. 13602 Enter value (%d) => 
  140. 13610 Enter a factor (greater than 1.0) for curve tolerance. A higher
  141. 13615 factor will generate smoother curves but will take longer to plot.
  142. 13620 This value corresponds to the number of lines that a curve will be
  143. 13625 broken up into regardless of its size.
  144. 13630 Enter curve tolerance factor (%f) => 
  145. 13650 Choose pen sorting option (%d) => 
  146. 13700 Plotter codes may be sent to a serial port (-n), parallel port (+n)
  147. 13701 or a file.  If a serial port is specified explicitly (eg. COM1 instead
  148. 13702 of -1) then you must configure the port for the correct communication's
  149. 13703 parameters using the DOS MODE command.
  150. 13704 NOTE: If the plotter is on a network the port should be specified
  151. 13705 explicitly (eg. COM1).
  152. 13706 Enter the name of the output port or file (%s) : 
  153. 13707 Choose baud rate (%d) => 
  154. 13710 Plotter output may be sent to a file or device by specifying the
  155. 13711 file or device name or may be sent to a spooler or filter program
  156. 13712 by preceding the spooler or filter name with '|'.
  157. 14000 CADKEY Printer Selection
  158. 14001 XXnone
  159. 14100 Choose printing resolution (%d) => 
  160. 14101 Choose printing mode: 0. Black and white, 1. color (%d) => 
  161. 14200 Do you wish to reassign the printer paper limits (%c) ? 
  162. 14201 Enter X min for paper (%f in.) => 
  163. 14202 Enter Y min for paper (%f in.) => 
  164. 14203 Enter X max for paper (%f in.) => 
  165. 14204 Enter Y max for paper (%f in.) => 
  166. 14303 Enter value (%d) => 
  167. 14400 Printer codes may be sent to a serial port (-n), parallel port (+n)
  168. 14401 or a file. If a serial port is specified explicitly (eg. COM1 instead
  169. 14402 of -1) then you must configure the port for the correct communication's
  170. 14403 parameters using the DOS MODE command.
  171. 14404 NOTE: If the printer is on a network the port should be specified
  172. 14405 explicitly (eg. COM1).
  173. 14406 Enter the name of the output port or file (%s) : 
  174. 14407 Choose baud rate (%d) => 
  175. 14410 Printer output may be sent to a file or device by specifying the
  176. 14411 file or device name or may be sent to a spooler or filter program
  177. 14412 by preceding the spooler or filter name with '|'.
  178. 151012 CADKEY uses temporary storage when it runs out of memory for the
  179. 151013 data base.  Temporary storage for your data base may reside in one 
  180. 151014 or more areas.  To store data base files on disk, a full path name 
  181. 151015 must be specified.  CADKEY allows up to two database storage areas.
  182. 151018 To specify more than one storage area separate with a semi-colon. 
  183. 1510121 CADKEY uses temporary storage when it runs out of memory for the
  184. 1510131 data base.  Temporary storage for your data base may reside in one 
  185. 1510141 or more areas.  To store data base files on disk, a full path name 
  186. 1510151 must be specified.  To specify more than one storage area separate 
  187. 1510161 with a semi-colon. CADKEY allows up to two database storage areas.
  188. 151019 For example:
  189. 151020   d:\tmp;c:\cadkey\db
  190. 151022     -- "d:\tmp" is the primary data base storage area.
  191. 151023     -- "c:\cadkey\db" is the secondary data base storage area.
  192. 1510201   /bin;/cadkey/db
  193. 1510221     -- "/bin" is the primary data base storage area.
  194. 1510231     -- "/cadkey/db" is the secondary data base storage area.
  195. 151025   /tmp;/usr/tmp;.
  196. 151027     -- "/tmp" is the primary data base storage area.
  197. 151028     -- "/usr/tmp" is the secondary data base storage area.
  198. 151029     -- "." is the tertiary data base storage area.
  199. 1510251   \tmp;.
  200. 1510271     -- "\tmp" is the primary data base storage area.
  201. 1510281     -- "." is the secondary data base storage area.
  202. 151030 Enter storage path(s) for data base files:
  203. 151040 Enter path for other system scratch files: 
  204. 151050 The CADKEY database will page to disk when there is no more memory
  205. 151051 available. The amount of memory that the database will use before it
  206. 151052 starts to page can be set here. Setting the value too low may degrade
  207. 151053 performance. Setting the value too high may cause the database to use
  208. 151054 all available memory and therefore cripple some CADKEY functions that
  209. 151055 require temporary memory. Setting a value of 0 will cause CADKEY to
  210. 151056 calculate an optimal setting for this value.
  211. 151057 Enter the number of K to use for database storage (%ld) => 
  212. 15108 System memory must be allocated for on-line printing and executing  
  213. 15109 complex functions from within CADKEY. At least 25K must be allocated
  214. 15110 for this purpose. By specifying a larger amount of memory, performance
  215. 15111 may be increased. The amount of memory available depends on your 
  216. 15112 CADKEY version, hardware configuration, and other software being run. 
  217. 15113 Enter K value between 25 and ? (%d) => 
  218. 15114 Choose UNITS mode for CADKEY (%d) => 
  219. 15115 The decimal precision for CADL output of REAL data may be controlled 
  220. 15116 by specifying the number of places to the RIGHT of the decimal point.
  221. 15117 Enter a value between 4 and 10 (%d) => 
  222. 15118 Enter the maximum number of CADL program statement labels supported. 
  223. 15119 Enter a value between 0 and 1000 (%d) => 
  224. 15120 Enter the maximum number of register variables supported at one time.
  225. 15121 Enter a value between 0 and 1000 (%d) => 
  226. 15122 Specify the maximum font size which may be accepted by the system.
  227. 15123 Enter K value greater than or equal to 8 (%d) => 
  228. 15124 Specify the CHAINING TOLERANCE, or the allowable distance between the
  229. 15125 endpoints of entities when performing CHAIN SELECTION.
  230. 15126 Enter value, in system units between .00001 and .02 (%f) => 
  231. 15127 Choose highlighting option (%d) =>  
  232. 15128 Choose part file auto-saving option (%d) => 
  233. 15129 Enter the time interval in minutes between auto-saves, the interval
  234. 15130 must be greater than 4 minutes or less than 1 hour (%d) =>
  235. 15131 Enter the auto-save part file name (%s) : 
  236. 15132 Will you be running other DOS Extender programs (such as SOLIDS or
  237. 15133 SURFACES) from CADKEY or from the DOS shell (Y/N) (%c) ? 
  238. 15134 Memory will have to be released by CADKEY to allow the other DOS
  239. 15135 Extender program to execute properly. It is recommended that at
  240. 15136 least 2048K be released for running SOLIDS or SURFACES. 
  241. 15137 Enter the number of Kbytes to release (%ld) => 
  242. 15200        CADKEY part files can now be locked by individual users.
  243. 15210     This eliminates the possiblity of users overwriting each others 
  244. 15220     modifications to the same part file.  
  245. 15230        When a part file is loaded it will be automatically locked.  
  246. 15240     The user who originally loaded the part file is the only user who
  247. 15250     can save modifications to this file under its current name.  
  248. 15260     Other users can load the part file but will be unable to save
  249. 15270     any modifications to the part file until the part file is unlocked.  
  250. 15280        Part files are automatically unlocked when an owner of a locked
  251. 15290     part file saves his part file and loads another part file or leaves 
  252. 15300     CADKEY all together.  
  253. 15310        File locking is a virtual neccessity in a multi-user 
  254. 15320     environment.
  255. 15400     Will CADKEY be used in a multi-user environment (Y/N) (%s) ?
  256. 15410     CADKEY needs every user to have a unique user name to
  257. 15420     enable file locking.
  258. 15450     Enter unique user name (8 character maximum) (%s) :
  259. 16100 Enter default path for PART files: 
  260. 16101 Enter default path for PATTERN files: 
  261. 16102 Enter default path for PLOT files: 
  262. 16103 Enter default path for CADL files: 
  263. 16104 Enter default path for MACRO files: 
  264. 16105 Enter default path for NOTE files: 
  265. 16106 Enter default path for SUPPORT files: 
  266. 16107 Enter default path for HELP files:
  267. 16108 Enter default path for CDE files:
  268. 17100 Enter default macro library file name (%s) : 
  269. 17101 Enter start-up macro file name (%s) : 
  270. 17102 Enter default CDE file name(s) (%s) : 
  271. 171021 Additional functionality can be provided by loading CADKEY Dynamic
  272. 171022 Extension (CDE) modules. If you are using CDE modules they may be
  273. 171023 loaded automatically when CADKEY starts by designating the name of
  274. 171024 the CDE modules here. If you are using more than one CDE module the
  275. 171025 names must be comma (,) separated. To remove the list of CDE names 
  276. 171026 enter a single space.
  277. 20001 ;graphics device driver name
  278. 20002 ;graphics device mode
  279. 20003 ;graphics X resolution (pixels)
  280. 20004 ;graphics Y resolution (pixels)
  281. 20005 ;device palette type: 0=dumb, 1=EGA/VGA, 2=RGB, 3=BGR (HALO Metheus)
  282. 20006 ;number of colors in device lookup table
  283. 20007 ;maximum red intensity integer code
  284. 20008 ;maximum green intensity integer code
  285. 20009 ;maximum blue intensity integer code
  286. 20010 ;monitor config 0=one 1=two, graphics primary 2=two, mono primary
  287. 20011 ;number of graphics device memory pages
  288. 20012 ;graphics binary screen save switch: 0=no, 1=yes
  289. 20013 ;graphics segment starting address: 0xffff=driver default
  290. 20014 ;graphics device attribute code: 0xffff=driver default
  291. 20015 ;physical screen X size (inches)
  292. 20016 ;physical screen Y size (inches)
  293. 20017 ;graphics cursor X size (inches)
  294. 20018 ;graphics cursor Y size (inches)
  295. 20019 ;graphics cursor color
  296. 20020 ;rubber banding color
  297. 20021 ;  The following configuration records have 4 values
  298. 20022 ;    1. border color
  299. 20023 ;    2. background color
  300. 20024 ;    3. draw/text color
  301. 20025 ;    4. border style: 0=none, 1=single, 2=double
  302. 20026 ;menu options window colors
  303. 20027 ;break window colors
  304. 20028 ;status window colors
  305. 20029 ;cursor tracking window colors
  306. 20030 ;history line colors
  307. 20031 ;prompt line colors
  308. 20032 ;system mode indicator colors
  309. 20033 ;pop up menus colors
  310. 20034 ;  The following configuration record has 4 values
  311. 20035 ;    1. border color for primary graphics viewport
  312. 20036 ;    2. border color for other graphics viewports
  313. 20037 ;    3. background color for all graphics viewports
  314. 20038 ;    4. border style for all graphics viewports
  315. 20039 ;viewport area colors
  316. 20040 ;minimum text height allowed (pixels)
  317. 20041 ;maximum text height allowed (pixels)
  318. 20042 ;minimum text width allowed (pixels)
  319. 20043 ;maximum text width allowed (pixels)
  320. 20044 ;menu text cursor: 0=inverse video, 1=arrow
  321. 20045 ;default viewport configuration layout
  322. 20046 ;    1 = single                    5 = 1 left, 2 right
  323. 20047 ;    2 = 2 vertical              6 = 2 bottom, 1 top
  324. 20048 ;    3 = 2 horizontal              7 = 1 bottom, 2 top
  325. 20049 ;    4 = 2 left, 1 right           8 = four
  326. 20050 ;maximum allowable number of viewports
  327. 20051 ;spacing between viewports for auto viewport placement (inches)
  328. 20052 ;display axes on entry: display viewport, construction viewport
  329. 20053 ;curve segmentation coarseness: 1.0=coarsest, 5.0=finest
  330. 20054 ;maximum number of horizontal and vertical grid points
  331. 20055 ;prompt marker color and size (inches)
  332. 20056 ;minimum increment size for sketching
  333. 20057 ;max number of entities to display while dynamically rotating part
  334. 20058 ;CADKEY input device
  335. 20059 ;CADL input device
  336. 20060 ;device driver
  337. 20061 ;device mode
  338. 20062 ;resolution (units/inch)
  339. 20063 ;device size (inches)
  340. 20064 ;minumum units
  341. 20065 ;cursor area X/Y min/max (inches)
  342. 20066 ;function area X/Y min/max (inches)
  343. 20067 ;# cols/rows of func area boxes
  344. 20068 ;button codes
  345. 20069 ;reversal flags
  346. 20070 ;device initialization
  347. 20071 ;ASCII format
  348. 20072 ;binary format
  349. 20073 ;plotter paper X size (inches)
  350. 20074 ;plotter paper Y size (inches)
  351. 20075 ;plotter pen width (mm)
  352. 20076 ;plotter X offset (inches)
  353. 20077 ;plotter Y offset (inches)
  354. 20078 ;plotter curve tolerance
  355. 20079 ;plotter sorting option
  356. 20080 ;plotter color map
  357. 20081 ;plotter communications configuration word
  358. 20082 ;plotter pen speed (cm/sec)
  359. 20083 ;plotter output port or file name
  360. 20084 ;printer paper X min (inches)
  361. 20085 ;printer paper Y min (inches)
  362. 20086 ;printer paper X max (inches)
  363. 20087 ;printer paper Y max (inches)
  364. 20088 ;printing pixel mode: 0=B/W,  1=Color
  365. 20089 ;printer output port or filename
  366. 20090 ;printer pixel width
  367. 20091 ;default part file pathname
  368. 20092 ;default pattern file pathname
  369. 20093 ;default plot file pathname
  370. 20094 ;default CADL file pathname
  371. 20095 ;default DXF file pathname
  372. 20096 ;default NOTE file pathname
  373. 20097 ;default HELP file pathname
  374. 20098 ;default data base scratch files pathname
  375. 20099 ;default system scratch file pathname
  376. 20100 ;default macro library file pathname
  377. 20101 ;size for SYSCMD and system buffer (K)
  378. 20102 ;0=inches, 1=millimeters, 2=feet, 3=centimeters, 4=yards, 5=meters
  379. 20103 ;CADL default decimal precision
  380. 20104 ;maximum number of CADL statement labels
  381. 20105 ;maximum number of register variables
  382. 20106 ;chain selection tolerance
  383. 20107 ;min. acceptable trimming intersection accuracy
  384. 20108 ;maximum font size (K)
  385. 20109 ;default macro library file name
  386. 20110 ;start-up macro name
  387. 20111 ;entity selection highlighting style
  388. 20112 ;auto-save time interval: 0=off, >0=seconds
  389. 20113 ;auto-save part name
  390. 20114 ;Reserved for future use
  391. 20115 ;Character set: 0=8 bit ASCII, 1=16 bit Kanji
  392. 20116 ;spacing between non-graphics viewports (inches)
  393. 20117 ;Path for CADKEY support files
  394. 20118 ;number of text rows for graphics device
  395. 20119 ;null func button value
  396. 20120 ;port device
  397. 20121 ;device communication configuration
  398. 20122 ;amount of memory to free when executing shell
  399. 20123 ;use EMM to store CADKEY image during shell (0=no; 1=yes)
  400. 21000 ;plotter clip limit X min (millimeters)
  401. 21010 ;plotter clip limit Y min (millimeters)
  402. 21020 ;plotter clip limit X max (millimeters)
  403. 21030 ;plotter clip limit Y max (millimeters)
  404. 21040 ;file locking status: (0=disable, 1=enable)
  405. 21041 ;default CDE file pathname
  406. 21042 ;start-up cde name(s)
  407. 21043 ;graphics cde name
  408. 21044 ;maximum database memory pool size
  409. 25000 Cursor 
  410. 25010 Function
  411. 25020 Cur/Func
  412. 25030 F1
  413. 25040 F2
  414. 25050 F3
  415. 25060 F4
  416. 25070 F5
  417. 25080 F6
  418. 25090 F7
  419. 25100 F8
  420. 25110 F9
  421. 25120 F10
  422. 25130 Enter/CR
  423. 25140 ESC
  424. 25150 ALT-A
  425. 25160 ALT-B
  426. 25170 ALT-C
  427. 25180 ALT-D
  428. 25190 ALT-E
  429. 25200 ALT-F
  430. 25210 ALT-G
  431. 25220 ALT-H
  432. 25230 ALT-I
  433. 25240 ALT-J
  434. 25250 ALT-K
  435. 25260 ALT-L
  436. 25270 ALT-M
  437. 25280 ALT-N
  438. 25290 ALT-O
  439. 25300 ALT-P
  440. 25310 ALT-Q
  441. 25320 ALT-R
  442. 25330 ALT-S
  443. 25340 ALT-T
  444. 25350 ALT-U
  445. 25360 ALT-V
  446. 25370 ALT-W
  447. 25380 ALT-X
  448. 25390 ALT-Y
  449. 25400 ALT-Z
  450. 25410 CTRL-A
  451. 25420 CTRL-B
  452. 25430 CTRL-C
  453. 25440 CTRL-D
  454. 25450 CTRL-E
  455. 25460 CTRL-F
  456. 25470 CTRL-G
  457. 25480 CTRL-H
  458. 25490 CTRL-I
  459. 25500 CTRL-J
  460. 25510 CTRL-K
  461. 25520 CTRL-L
  462. 25530 CTRL-M
  463. 25540 CTRL-N
  464. 25550 CTRL-O
  465. 25560 CTRL-P
  466. 25570 CTRL-Q
  467. 25580 CTRL-R
  468. 25590 CTRL-S
  469. 25600 CTRL-T
  470. 25610 CTRL-U
  471. 25620 CTRL-V
  472. 25630 CTRL-W
  473. 25640 CTRL-X
  474. 25650 CTRL-Y
  475. 25660 CTRL-Z
  476. 25670 -VERIFY-
  477. 30 The color settings are invalid for the selected graphics device.
  478. 31 Do you wish to change them now (%c) ?
  479. 90 Are you sure you want to exit without saving changes (%c) ? 
  480. 99 *** Saving CONFIG.DAT file ***
  481. 999
  482.