home *** CD-ROM | disk | FTP | other *** search
- FULLPAGE.SYS
-
- You use the FULLPAGE.SYS scanner driver with the Complete
- PC FullPage Scanner.
-
- The FullPage scanner is not entirely programmable from the
- program. It has switches you can use to vary resolution and
- halftone patterns. The resolution you set in the program
- must match the resolution you set on the scanner. You can
- vary brightness with the scanner's slide switch.
-
- To manually add the device driver to your CONFIG.SYS, use a text
- editor to type the entry as it appears below. Be sure to
- include a path if the scanner driver is not in your root directory.
- Remember to include additional parameters when necessary.
-
- CONFIG.SYS entry:
-
- device=FULLPAGE.SYS
-
- Available port addresses and the parameters you should add
- to your CONFIG.SYS:
-
- Port 3E0H The default for this scanner. Add the parameter
- /H3EO to your CONFIG.SYS.
- Port 3A0H Add the parameter /H3A0 to your CONFIG.SYS.
- Port 360H Add the parameter /H360 to your CONFIG.SYS.
- Port 320H Add the parameter /H320 to your CONFIG.SYS.
- Port 2E0H Add the parameter /H2E0 to your CONFIG.SYS.
- Port 2A0H Add the parameter /H2A0 to your CONFIG.SYS.
- Port 260H Add the parameter /H260 to your CONFIG.SYS.
- Port 220H Add the parameter /H220 to your CONFIG.SYS.
-
- Available DMA Channels and the parameters you should add to your
- CONFIG.SYS:
-
- DMA Channel 1 Add the parameter /C1 to your CONFIG.SYS.
- DMA Channel 3 The default for this scanner. Add the parameter
- /C3 to your CONFIG.SYS.
-
- Settings supported by this scanner:
-
- Brightness Set on scanner, continuously variable
- Contrast Not supported by scanner
- Colors B&W only
- Halftones Bayer, Mesh, and Spiral patterns
- in 4x4 and 8x8 sizes
- Resolutions 300x300, 200x200
- Set on scanner and within the program
-