home *** CD-ROM | disk | FTP | other *** search
-
- Accton Technology Corporation
- NETWARE DRIVER INSTALLATION OVERVIEW
- ====================================
-
- Copyright (c) 1992, 1993 by Accton Technology
- Corporation. All rights reserved.
-
- This file describes the contents of the \NETWARE
- subdirectory. For more detailed information about
- NetWare installation, please refer to the
- "NOVELL NetWare ODI Shell for DOS" manual.
-
- List Of Files You Need
- ----------------------
-
- ------------------------------------------------------
- Filename Description
- ------------------------------------------------------
- LSL.COM This file implements the Link Support
- Layer for DOS ODI workstations
- and is the program that is generally
- loaded first when booting. The Link
- Support Layer file enables the
- workstation to communicate over
- several protocols.
-
- IPXODI.COM This is Novell's protocol stack for
- DOS ODI workstations. It performs
- the same functions as the IPX.COM, which
- is used for DOS workstations. However
- it is optional and is loaded after the
- LAN driver. Other protocols can be loaded
- in its place or with it. This is one
- of the key features of the ODI
- environment.
-
- NETx.COM NetWare Network program.
- --------------------------------------
- If you use You Need
- --------------------------------------
- Conventional memory NETx.COM
-
- Expanded memory EMSNETx.EXE
- (LIM 4.0 EMS Compatible)
-
- Extended memory XMSNETx.EXE
- (XMS 2.0 compatible)
- ---------------------------------------
-
- NETBIOS.EXE The Netbios emulation program
- (INT 5CH interface) allows you to
- run Netbios application programs
- based on the NETBIOS.EXE
- interface. The running sequence is:
-
- a. IPX shell driver
- IPX.COM
- NETBIOS.EXE ---> netbios emulation
- ... interface
-
- b. DOS ODI driver
- LSL.COM
- NWMLID.COM ---> Accton DOS ODI driver
- IPXODI.COM
- NETBIOS.EXE
- ...
- ------------------------------------------------------------
-
-
- For MS-DOS V6.X And The Later
- -----------------------------
- NETX will check the current DOS version. It support MS-DOS untill V6.0. IF
- you use the later version with this NETX, please add a command, "SETVER", in
- your CONFIG.SYS file. It is included in your DOS utilities and can cover the
- problem about DOS version.
-
-
- ===End===
-
-