1 COM initialization failed\nMake sure that the COM libraries are the correct version
2 Warning
3 Error
4 Password was not retyped correctly, please try again
5 You must enter a password to proceed
6 The following file was encrypted with %s\n\n%s\n\nYou do not have this encryption engine installed\nWould you like to download and install it now?
7 Unable to open file for processing\n%s (Error code: %lu)
8 BlackBox Encrypt
9 BlackBox Decrypt
10 The following file will be skipped and left encrypted\n\n%s
11 The encryption engine %s is not available for automatic download\nWould you like to browse the engine library manually?
12 There was an error automatically installing encryption engine %s\nCurrent file will be skipped and left encrypted\nDo you want to browse the engine library manually, so that you can\nretry decrypting later?
13 Unable to create temporary file\n%s (Error code: %lu)
14 There was an error reading from source file
15 There was an error reading from source file\n%s (Error code: %lu)
16 Unable to start a web browser to go to the site below:\n%s
17 There was an error writing into target file\n%s (Error code: %lu)
18 Copying temporary file...
19 Processing... (%s)
20 There was an error while processing the file\n%s\nCould not copy the processed temporary file in place of the original file\n%s (Error code: %lu)\n\nYour original data file was processed successfully and the\nresult is in temporary file\n%s\n\nThe original file will be deleted
21 There was an error while processing the file\n%s\nCould not copy the processed temporary file in place of the original file\n\nYour original data file was processed successfully and the\nresult is in temporary file\n%s\nThe original file will be deleted
22 There was an error removing authentication information from original file\n%s (Error code: %lu)
23 Unable to change file type to reflect that is encrypted by BlackBox\n%s (Error code: %lu)
24 Unable to change file type back to original\n%s (Error code: %lu)
27 There is not enought temporary space to process file\n%s\nIf not encrypting to an self-extracting file, you can try to\neither free up some space on the drive containing your\ntemporary folder or enable in-place processing
28 There is not enought temporary space to process file\n%s\nDo you agree to process it in-place?
29 You choosed to encrypt the selected files into a self-extracting encrypted archive\nbut did not specified the name of the self-extracting file.\nWould you like to do it now?
30 You choosed to encrypt the selected files into a self-extracting encrypted archive\nbut did not specified the name of the self-extracting file
31 Evaluation (%d days remaining)
32 The specified registration information is invalid\nPlease contact Interscope Ltd. for a valid code or support.
33 Registration
35 Evaluation (trial period expired)
36 (Evaluation, %d days remaining)
37 (Evaluation, trial period expired)
38 Could not create instances of the encryption engines
39 The following file was encrypted using an unsupported DES algorythm\nand will be ignored:\n%s
40 If you stop this operation, all unprocessed files will remain %s.\nAre you sure that you want to cancel the %s of the selected\nfiles and/or folders?
41 If you stop this operation, you will lose the file that is currently being\nprocessed and all unprocessed files will remain %s.\nAre you sure that you want to cancel the %s of the selected\nfiles and/or folders?
50 Unable to initialize the core self-extractor engine
51 Adding file to self-extracting package...
52 There was an error while adding file to the self-extractor package\n%s
53 There was an error while adding folder(s) to the self-extractor package
54 There is already such an exclusion rule in your exclusion list
55 The exclusion rule you specified contains invalid characters\nExclusion rules must not contain any of these characters:\n " < > |
56 The exclusion rule you specified contains too many wildcards
57 The exclusion rule you specified is not an absolute path or a generic filename\nIf exclusion rules contain path delimiters then must refer to an absolute path\n(e.g. C:\Windows\ or \\Uranus\Temp\Readme.txt)
58 Cannot add empty exclusion rules
59 The file you have chosen to open is an encrypted file, and before you can\nopen it you must decrypt it. Also, you should remember to reencrypt the\nfile after you finish working with it\nThis operation requires the password used when the file was encrypted\nDo you want to decrypt and then open the file?
60 The files you have chosen to open are encrypted files, and before you can\nopen them you must decrypt them. Also, you should remember to reencrypt the\nfiles after you finish working with them\nThis operation requires the password(s) used when the files were encrypted\nDo you want to decrypt and then open the files?
61 Could not initialize DDE
62 There was an error starting tray status notifier program\n%s (Error code: %lu)
63 All files (*.*)|*.*||
65 <more>...
66 Add To Security Set
67 Select a folder that you would like to add to the security set
68 The folder you selected to be added in security set is already included\nin the security set and will be ignored
69 Some of the files you selected to be added in security set are already\nincluded in the security set and will be ignored:\n\n%s
70 This will remove all files and folders from your security set\nAre you sure you want to do this?
71 Some objects that are included in the security set no longer exist on disk\nThese objects will be removed from your security set\n\n%s
72 The object(s) you added in the security set caused it to be partially locked\nWould you like to lock the security set now?\nPress Yes to lock the security set, No to unlock the security set or\nCancel to leave it partially locked
73 Some objects that were already included in the security set were rendered\nredundant by including this folder in the security set too\nThis is because the newly added folder includes them\nAll redundant objects will be removed from the security set
74 This evaluation copy of Interscope BlackBox has expired\nYou should register your copy if you want to continue using it,\nsince this is the last time you will be allowed to run it
75 This evaluation copy of Interscope BlackBox has expired\nYou should register your copy if you want to continue using it
76 Internal error %06ld while Interscope BlackBox was processing command line parameters\nPlease contact Interscope for more information
77 &Close
78 the operating system is out of memory or resources
79 the specified file was not found
80 the specified path was not found
81 you cancelled opening the document
82 the operating system denied access to the specified file
85 the DDE transaction failed
87 the specified dynamic-link library was not found
88 there is no application associated with the given file name extension
89 there was not enough memory to complete the operation
90 a sharing violation occurred
91 The file %s\nwas successfully decrypted but could not be automatically opened because\n%s\n\nYou can open it manually by double clicking it in Windows Explorer
93 The following file was not encrypted by BlackBox and will be ignored:\n%s
94 Could not add encryption engine in the engine list
95 Name
96 Key Size
97 Unable to compress file before adding it into a self-extracting archive\n%s (Error code: %lu)
98 Compressing... (%s)
99 Unknown Algorithm
100 There is no encrypted file to be sent by e-mail\nThis is either because no file was successfully encrypted or\nbecause you cancelled creation of an encrypted self-extracting archive
101 There was an error adding file(s) as attachment(s) in new e-mail message
102 There was an error sending the e-mail message\n%s
103 There was an error initializing MAPI, cannot send encrypted files by e-mail
140 Generic MAPI failure
141 MAPI login failure
142 Disk full
143 Out of memory
144 Access denied
145 Too many open MAPI sessions
146 Too many files were specified
147 Too many recipients were specified
148 A specified attachment was not found
149 Could not open a specified attachment
150 Could not write into a specified attachment
151 Unknown recipient specified
152 Bad recipient type
153 No messages
154 Message is invalid
155 Text is too large
156 Invalid MAPI session
157 Specified type not supported
158 A recipient was specified ambiguously
159 Message in use
160 Network failure
161 Invalid edit fields
162 Invalid recipients specified
163 Requested MAPI feature not supported
164 Could not spawn a worker thread to send e-mail
165 None of the files you selected were appended to the new self-extractor,\ndue to exclusion rules and the multiple encryption settings
166 Exclude File
167 Select a folder to exclude from encryption
168 Exclude Folder
169 Unknown
170 Provider
171 Unable to spawn thread for invoking the browse dialog
180 Shredder
181 My Safe
182 Are you sure you want to remove the Shredder icon from your desktop?
183 Are you sure you want to remove the My Safe icon from your desktop?
184 Self-Extractor
190 Low Security
191 Medium Security
192 High Security
193 Custom Security
194 Minimal Interface
195 Standard Interface
196 Full Interface
197 Custom Interface
198 Low security provides minimal file safety but results in the best overall encryption performance and disk space usage.
199 Medium security will provide balanced safety and speed, it is the recommended setting for most users
200 High security uses the most powerful encryption methods, employs the safest data disposal and guards against data corruption during encryption.
201 Save in encrypted files
202 Do not save in encrypted files
203 Enabled
204 Disabled
205 Yes
206 No
207 Gutmann
208 US DoD 5225.22M
209 Pseudorandom
210 Custom
211 N/A
212 Interscope BlackBox
213 The minimal interface only enables commands for file encryption and decryption, keeping your user interface light and fast
214 The standard interface includes most commands integrated discretely in the shell and third-party applications, recommended for most users
215 The full interface means all commands and security-related operations are available, full integration with the shell, the desktop and third party applications
216 All
217 None
218 Some
219 Basic
300 Security settings in effect on this computer
301 Select encryption algorithm to use
302 Change how data is wiped
303 Select files not to encrypt
304 User interface available on this computer
305 Change desktop and Explorer integration
306 Change the system tray interface
308 Change miscellaneous settings
309 Change keyboard shortcuts
310 Fine-tune file encryption
311 Manage your data
312 Organize your sensitive data
313 Distribute your sensitive data
314 Keep your software current
320 Security
321 Algorithms
322 Shredder
323 Exclusions
324 Appearance
325 Shell
326 System Tray
327 Customize
328 Keyboard
329 Advanced
330 Automation & Tools
331 Security Set
332 Self-Extractor
333 Updates
334 Clipboard
335 Window
336 Security Set
337 Other
338 Encrypt
339 Encrypt to File
340 Decrypt
341 Edit
342 Empty
343 Encrypt
344 Encrypt to File
345 Lock
346 Unlock
347 Consolidate
348 Low Security
349 Medium Security
350 High Security
351 Normal Interface
352 Full Interface
353 Decrypt
354 Minimal Interface
355 Settings
357 Commands for working with the clipboard
358 Commands for current window operations
359 Commands for the security set
360 Commands for other settings
361 Clipboard encrypt
362 Encrypt the content of the clipboard into a file
363 Decrypts the content of the clipboard
364 Empties the content of the clipboard
365 Edits the content of the clipboard
366 Encrypts the content of the current window
367 Encrypts the content of the current window and saves it in a file
368 Decrypts the text content of the clipboard
369 Locks the files in your security set
370 Unlocks the files in your security set
371 Consolidates the security set
372 Applies the low security schema
373 Applies the medium security schema
374 Applies the high security schema
375 Switches to the normal interface
376 Switches to the minimal interface
377 Switches to the full-featured interface
378 Opens the preferences dialog for changing miscellaneous Interscope BlackBox settings
379 There was an error while Interscope BlackBox was checking for available updates
382 The path where you want to create the self-extracting archive does not exist\nDo you want to create it now?
383 There was an error creating the path for the self-extractor archive\n%s
61440 Open
61441 Save As
61442 All Files (*.*)
61443 Untitled
61446 an unnamed file
61457 &Hide
61472 No error message is available.
61473 An unsupported operation was attempted.
61474 A required resource was unavailable.
61475 Out of memory.
61476 An unknown error has occurred.
61696 Invalid filename.
61697 Failed to open document.
61698 Failed to save document.
61699 Save changes to %1?
61700 Failed to create empty document.
61701 The file is too large to open.
61702 Could not start print job.
61703 Failed to launch help.
61704 Internal application error.
61705 Command failed.
61706 Insufficient memory to perform operation.
61707 System registry entries have been removed and the INI file (if any) was deleted.
61708 Not all of the system registry entries (or INI file) were removed.
61709 This program requires the file %s, which was not found on this system.
61710 This program is linked to the missing export %s in the file %s. This machine may have an incompatible version of %s.
61712 Please enter an integer.
61713 Please enter a number.
61714 Please enter an integer between %1 and %2.
61715 Please enter a number between %1 and %2.
61716 Please enter no more than %1 characters.
61717 Please select a button.
61718 Please enter an integer between 0 and 255.
61719 Please enter a positive integer.
61720 Please enter a date and/or time.
61721 Please enter a currency.
61728 Unexpected file format.
61729 %1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730 Destination disk drive is full.
61731 Unable to read from %1, it is opened by someone else.
61732 Unable to write to %1, it is read-only or opened by someone else.
61733 An unexpected error occurred while reading %1.
61734 An unexpected error occurred while writing %1.
61836 Unable to read write-only property.
61837 Unable to write read-only property.
61840 Unable to load mail system support.
61841 Mail system DLL is invalid.
61842 Send Mail failed to send message.
61856 No error occurred.
61857 An unknown error occurred while accessing %1.
61858 %1 was not found.
61859 %1 contains an invalid path.
61860 %1 could not be opened because there are too many open files.
61861 Access to %1 was denied.
61862 An invalid file handle was associated with %1.
61863 %1 could not be removed because it is the current directory.
61864 %1 could not be created because the directory is full.
61865 Seek failed on %1
61866 A hardware I/O error was reported while accessing %1.
61867 A sharing violation occurred while accessing %1.
61868 A locking violation occurred while accessing %1.
61869 Disk full while accessing %1.
61870 An attempt was made to access %1 past its end.
61872 No error occurred.
61873 An unknown error occurred while accessing %1.
61874 An attempt was made to write to the reading %1.
61875 An attempt was made to access %1 past its end.
61876 An attempt was made to read from the writing %1.
