1 ATTENTION!\n\n%s is not the same program you allowed but it has the same name as a program you allowed. Either you just upgraded %s or it is a fake. If you installed a newer (and trusted) version press "Allow It". Otherwise press "Block It" to move the application to the Restricted group and scan for virus.
2 Attention! You have the following firewalls installed:\n\n%s\nWe strongly recommend that you uninstall all firewalls before starting Outpost Firewall.\n\nPlease note: If you disable your firewall from booting up at startup or simply shutdown the firewall, it does not remove the drivers and services that most personal firewalls leave in memory.\n\nYou will most likely have the following problems if you decide to run more then one firewall on your computer:\n\n- Blue screen fatal errors, system freezing or sudden system reboots.\n- All access will be allowed for every application. Nothing will be blocked.\n- Every application will be blocked and you will be unable to connect to any web site.\n- Your computer system will be unable to boot up.\n- Every other error imaginable!\n\nPlease click on the Details button to see what particular services or drivers from other firewall software vendors are currently running on your system.
100 OLE initialization failed. Make sure that the OLE libraries are the correct version.
101 Agnitum Outpost Firewall
200 Where the specified protocol is
201 Where the specified direction is
202 Where the specified remote host is
203 Where the specified remote port is
204 Where the specified local host is
205 Where the specified local port is
206 Where the specified time interval is
218 Allow all traffic
219 Stop all traffic
220 Allow it
221 Deny it
222 Reject it
223 Log it
224 Report it
225 Bps
226 Run application
300 New rule
301 or
302 and
303 Where the direction is
304 Where the protocol is
305 Where the local port is
306 Where the remote port is
307 Where the host is
308 Application allready has defined rules. Move it to custom folder (No) or reset rules and load it from specified template (Yes)?
309 Outbound
310 Both
311 Undefined
312 TCP
313 UDP
314 ICMP
315 or
316 Port
317 Name
318 Description
319 Must specify IP address
320 Options
321 The password you typed is incorrect.
322 Warning. No password!
323 Password was not duplicated.
324 Trusted applications
325 Blocked applications
326 Executable files
327 Active Time interval is
328 Password Error
329 In
330 Out
331 Administraror approved
332 Disable
333 Enable
334 Prompt
335 High security
336 Low security
337 You must select at least one criteria from the list to create a rule.
338 You must select at least one action from the list to create a rule
339 Some information is missing or incorrect. Please correct the highlighted items.
340 Please click the items colored red below to correct missing or incomplete values.
341 Please select protocol first.
342 Inbound
343 Select remote port
344 Remove this rule?
345 Copy of
346 New rule
347 Partially allowed applications
348 This rule is currently turned off.
349 Invalid port string. Enter the correct port numbers and aliases.
350 First value in port range must be less than second value.
351 Cannot drag and drop this file type here (only .EXE or .DLL).
352 Enter the correct ports range
353 Invalid port number
354 You should specify the ports
355 Aliase %s not found.
356 The port aliases cannot be blank.
357 Port number must be in range from 1 to IDC_STATIC
358 There is no rule selected.
359 Referers
360 A port with the same number is already specified.
361 The same port range is already specified.
362 Start Time
363 Up Time
364 Sent
365 Received
366 Remote Addr
367 Protocol
368 Local Port
369 Direction
370 Application
371 Remote Port
372 Remote Host
373 Reason
374 Line %d: Unexpected token while looking for the application (%s)
375 Line %d: Wrong application specified (%s)
376 Line %d: Wrong token found (%s)
377 Line %d: Wrong DefaultState value found (%s)
378 Line %d: Wrong rule name
379 Line %d: Wrong Protocol value found (%s)
380 Line %d: Wrong Destination value found (%s)
381 Rule %s is uncomplete and can't be added
382 Line %d: No protocol specified, and port can't be choosen
383 Line %d: Wrong Port value found (%s)
384 Create rules using preset
385 Other...
386 Line %d: Wrong Host address found (%s)
387 No listed item selected.
388 No column header selected.
389 Description
390 Unknown
391 Data
392 Time
393 Description
394 Listening
395 Example: www.domain.com
396 Example: 194.226.197.0 - 194.226.198.255
397 Example: 195.168.1.*
398 A successful WSAStartup must occur before using this function.
399 The network subsystem has failed.
400 Authoritative Answer Host not found.
401 Non-authoritative host was not found or server failure.
402 A non-recoverable error occurred.
403 Valid name but no data record of requested type.
404 A blocking Windows Sockets 1.1 call is in progress, or the service provider is still processing a callback function.
405 The name parameter is not a valid part of the user address space.
406 A blocking Windows Socket 1.1 call was canceled through WSACancelBlockingCall.
407 Unknown error
408 and packet type is
420 Allow most
421 Block most
422 Rules Wizard
423 Allows all communication that you do not specifically block.
424
425
426 Blocks all communication that you do not specifically allow. You must create firewall rules for each application that requests Internet access.
427
428
429 Guides you through the process of creating a rule for any type of communication that has not been covered by current firewall rules. Once a rule is made, the firewall applies it to future communications automatically.
430
431
432 Outpost Firewall can't present the entered IP range %d.%d.%d.%d-%d.%d.%d.%d as Address:mask\n\nThe nearest correct values are %d.%d.%d.%d-%d.%d.%d.%d\n\nThe resulting IP address and mask will be %d.%d.%d.%d(%d.%d.%d.%d)\n\nDo you want to add this range?
433 Ungroup
434 Incoming
435 Outgoing
436 Open Ports
437 Established
438 Allowed
439 Blocked
440 My Internet
441 &Application
442 &Local Port
443 &Remote Host
444 R&emote Port
445 &Ungroup
446 &Direction
447 Block Reason
448 &Block reason
449 Sort &Ascending
450 Sort &Descending
451 No Sort Criteria Available Here
452 No Group Criteria Available Here
453 All Connections
454 Disconnected
455 No value selected for filter
456 %s requesting an incoming connection with
457 Blocks all communication incoming and outgoing.
458
459
460 Stop all mode
461 Plug-Ins
462 DNS Cache
463 Root
464 Date/Time
465 Event
466 New record
467 Cache hit
468 Plug-In
469 Module
470 IP
471 Status
472 Pop up windows
473 Outpost Firewall
474 Fw 777777, Web 777777
475 Area for mode in statusbar
476 Fw %d, Web %d
477 Domain Name
478 Error loading driver %d
479 Driver initialization error %X@%d
480 Error loading plug-in DNSCACHE.DLL
481 Local Address
482 Where the local host is
483 Lo&cal Host
484 Local Host
485 Content Blocking Settings
486 Ad Blocking Settings
487 Error loading plug-in HTTPFILT.DLL
488 Error loading plug-in ADBLOCK.DLL
489 Closing in %d secs
490 Following application requested an outgoing connection
491 Remote host requested an incoming connection
492 Log
493 Web
494 Ads
495 Content
496 Action
497 URL
498 Details
499 Keyword
500 Block cookie
501 Block ActiveX object
502 Block Java applet
503 Blockl Java script
504 Hide Referrers
505 Kill Popup window
506 Block host
507 Block content
508 Block by string
509 Block by size
510 Block by link
511 Block request
512 No cache answer
513 Block image
514 No preset rules found
515 Close
516 You have to chose action
517 The specified rule doesn't define an Outpost action for the specified connection.
518 &Show Outpost Firewall
519 &Hide Outpost Firewall
520 Create rule for %s
521 Disable mode
522 Disables the firewall and allows all communications unrestricted access.
523
524
525
526 Execute plug-in options
527 Execute plug-in options
528 Execute plug-in options
529 Execute plug-in options
530 Execute plug-in options
531 Execute plug-in options
532 Execute plug-in options
533 Execute plug-in options
534 Execute plug-in options
535 Select local address
536 %s requesting an incoming connection with
537 %s requesting an outgoing connection with
538 Started
539 Stopped
540 Monday
541 Tuesday
542 Wednessday
543 Thursday
544 Friday
545 Saturday
546 Sunday
547 Everyday
548 Working days
549 Weekend
550 All
551 Never
552 Wrong time interval
553 Create rule for ICMP
554 From %d:%d:%d To %d.%d.%d
555 &Allow this type
556 &Block this type
557 &Create rule
558 The system requests ICMP
559 ICMP Type
560 Allow activity for application
561 Block activity for application
562 Remove this read-only rule?
563 Modify this read-only rule?
564 Application for this connection not found.\nOutpost Firewall cannot create this rule.
565 Choose Target Folder
566 %s requesting an outgoing connection with
567 Please enter password to exit Outpost Firewall.
568 Password incorrect. Please re-enter password to exit Outpost Firewall.
569 Trusted Zone
570 Type
571 State
572 Reported
573 NetBIOS Address
574 The language will be changed after reboot.
575 Create rule for %s
576 and type is
577 Internet control message protocol (ICMP)
578 Gateway-gateway protocol (IGMP)
579 Transmission control protocol (TCP)
580 Exterior gateway protocol (GGP)
581 PARC universal packet protocol (PUP)
582 User datagram protocol (UDP)
583 Host monitoring protocol (HMP)
584 Xerox NS IDP (XNS-IDP)
585 "reliable datagram" protocol (RDP)
586 MIT remote virtual disk (RVD)
587 Default
588 Application:
589 Remote service:
590 Remote address:
591 Outpost Firewall Report
592 Clear all information from log files and log windows?
593 Copy Attack &Type
594 Copy &Date/Time
595 Copy &IP
596 Copy &Ports
597 Copy &DNS
598 All protocols
599 Unknown Protocol
600 Other...
601 Missing value in IP address
602 %d is not a valid entry. Please specify a value between 0 and 255 for this field.
32771 Changes miscellaneous view settings
32772 Go to Outgoing Connections folder\nOutgoing Connections
32773 Go to Allowed folder\nAllowed Connections
32774 Go to Blocked folder\nBlocked Connections
32775 Show or hide the folder bar\nToggle FolderBar
32776 Create or modify the rules\nRules
32777 Change the program settings\nOptions
32778 Go to My Internet folder\nMy Internet
32779 Modify output columns\nColumns settings
32786 Modify output columns\nColumns settings
32795 Change the layout settings
32798 Group the items by...\nGroup by
32799 Filter the connection history using selected event\nFilter by selection
32800 Filter the connection history using the time interval\nFilter by time
32817 Change the general settings
32818 Change the applications settings
32819 Change the system settings
32820 Change the policy settings
32821 Manage plug-ins and their settings.\nManage Plugins
32824 Delete the current event filter\nShow all events
32827 Select the Allow most mode
32828 Select the Block most mode
32829 Select the Rules Wizard
32830 Select the Stop All mode
32836 Quits the application and prompts to save documents\nExit
32837 Show or Hide Outpost Firewall
32838 Filter the connection history\nFilter
32839 Change the current policy mode\nPolicy
32840 Show window Always On Top
32841 Toggles 'Always On Top'
32842 Select the Disable mode
32855 Configure the plug-ins\nPlug-ins
32858 Display file properties
32859 Save all logs in text format
32860 Copy current line
32861 Check for newer vesion\nUpdate
40001 Show the history for the selected application
40002 Displays the table of contents for the documentation.
40006 Blocks the application activity until reboot.
40008 Allows the application activity only until reboot.
40019 Change the settings of selected plug-in
40020 Clear all log information
40023 Clear the current log
40025 Register your copy of Outpost Pro
57344 Outpost Firewall
57345 Ready
57600 Create a new document\nNew
57601 Open an existing document\nOpen
57602 Close the active document\nClose
57603 Save the active document\nSave
57604 Save the active document with a new name\nSave As
57616 Open this document
57617 Open this document
57618 Open this document
57619 Open this document
57620 Open this document
57621 Open this document
57622 Open this document
57623 Open this document
57624 Open this document
57625 Open this document
57626 Open this document
57627 Open this document
57628 Open this document
57629 Open this document
57630 Open this document
57631 Open this document
57632 Erase the selection\nErase
57633 Erase everything\nErase All
57634 Copy the selection and put it on the Clipboard\nCopy
57635 Cut the selection and put it on the Clipboard\nCut
57636 Find the specified text\nFind
57637 Insert Clipboard contents\nPaste
57640 Repeat the last action\nRepeat
57641 Replace specific text with different text\nReplace
57642 Select the entire document\nSelect All
57643 Undo the last action\nUndo
57644 Redo the previously undone action\nRedo
57653 Split the active window into panes\nSplit
57664 Display program information, version number and copyright\nAbout
57665 Quit the application; prompts to save documents\nExit
57669 Display help for clicked on buttons, menus and windows\nHelp
57680 Switch to the next window pane\nNext Pane
57681 Switch back to the previous window pane\nPrevious Pane
59136 EXT
59137 CAP
59138 NUM
59139 SCRL
59140 OVR
59141 REC
59392 Show or hide the toolbar\nToggle ToolBar
59393 Show or hide the status bar\nToggle StatusBar
59397 Arrange icons on a grid.
59408 Display items by using small icons.\nSmall Icons
59409 Display items by using large icons.\nLarge Icons
59410 Displays items in a list.\nList
59411 Displays detailed information about each item in the window.\nDetails
59412 Arranges icons in a grid.
59413 Sorts the icons alphabetically.
61184 Change the window size
61185 Change the window position
61186 Reduce the window to an icon
61187 Enlarge the window to full size
61188 Switch to the next document window
61189 Switch to the previous document window
61190 Close the active window and prompts to save the documents
61202 Restore the window to normal size
61203 Activate Task List
63022 You may legally use it for a maximum period of 30 days. If you would like to continue using it after that period, please click the [Order] button.\n\nYou can order the registration version online, by phone, or by mail. Imidiate online delivery is availble from www.agnitum.com
63023 The evaluation period of this application will expire in %d days.
63024 The evaluation period for this application has expired.
63025 Thank you for trying Outpost Firewall Pro!\n\nYou can order the registration version online, by phone, or by mail. Imidiate online delivery is availble from www.agnitum.com\n\nIf you would like to continue using Outpost Firewall Pro please click [Order] button now.
63026 The information that you have entered is either incomplete or invalid. Please re-enter your details.
63027 If you paid %s registration fee and received a registration code from Agnitum Ltd. or an authorized reseller, please enter your registration code here EXACTLY as they appear in the instructions.
63028 Thank you for registration! Please restart the application.
63029 Registered to %s
63030 This is unregistered copy for evalution use only.
