home *** CD-ROM | disk | FTP | other *** search
-
- README.1ST Read before executing ANY programs.
-
- March 14, 1993
-
- General Comments
- ----------------
- If you have a registered copy of the Message Finder System,
- you should now have in your possession a floppy disk containing
- the system. Before proceeding you may wish to make a backup copy
- of this disk. If you obtained the system as the shareware file
- MFS204.ZIP, you should now unzip that file preferably onto an empty
- formatted floppy disk (which will become your backup copy after
- installation.)
-
- Version 2.04 of the Message Finder System (MFS) is written for
- use with the Off-Line Xpress (OLX) Version 2.1 (or OLXTD or SLMR)
- off-line reader, or the Blue Wave Vers. 2.10 off-line reader systems.
- OLXTD is the shareware "test-drive" version of OLX, while SLMR (Silly
- Little Mail Reader) is a predecessor version of OLX, which is said to
- be essentially identical. This version of the Message Finder System
- will NOT function correctly with the recently released version 3.0 of
- OLX. This version of MFS also requires the PKWARE system (Vers 1.01)
- for file compression/decompression system, and the Alpha 4
- file-management system (Vers. 2.0 or 2.1) It may be possible to
- operate the system with other file-management systems having
- import/export capability, although I have not tested the system with
- any of these systems.
-
- If this is an INITIAL installation and if you are already
- using Alpha 4, first check the directory used for execution of
- Alpha 4 (the directory containing A4.EXE). There should be NO
- files in that directory named: A4.ITM, OLXINP.SCP, FIND1.SCP, or
- FINDX.SCP If any of these files already exist, they should be
- renamed if possible, before executing MFINSTAL.EXE for the first
- time. If you are unable to rename these files, consult with the
- author of this system before proceeding. If this is an UPDATE,
- the above files will already be in existence. During an update
- with MFINSTAL.EXE, these files will be reloaded with updated
- versions, if any. Otherwise none of the Alpha 4 data-base files
- will be disturbed.
-
- Please read the Message Finder System Documentation (file
- MSGFIND.DOC) carefully before executing MFINSTAL.EXE. This file
- may be printed by entering: COPY MSGFIND.DOC PRN from the
- directory containing that file, e.g. when entering from floppy
- disk.
-
- If you find this system to be useful, and intend to continue
- using it, I would appreciate your registration for this use. A
- registration form is included in the documentation and for your
- convenience as a separate file, MSGFIND.REG. Whether you register
- or not, I would greatly appreciate your comments.
- Is the documentation clear? Easy to understand? Do you have any
- suggestions for program additions or modifications. Also when you
- write your comments, I would like to know EXACTLY what system you
- are using with MFS -- both hardware and interface software, i.e.
- off-line reader software version, etc.
-
- Modifications from Earlier Versions
- -----------------------------------
-
- Version 2.03 of MFS corrected several minor problems which
- were discovered after the original 2.01 and 2.02 beta-test
- versions were issued. In addition, the system was modified so
- that it could accommodate either Vers. 2.0 or 2.1 of the Alpha-4
- file-management system.
-
- Version 2.04 of MFS includes additional corrections and
- modifications of earlier versions. Some of the following changes
- included in this version were recommended by beta-tester Bob
- Perkins, to whom I am deeply indebted:
-
- 1) Made it possible to specify location for ZIP file during
- installation, i.e. on floppy or hard-drive directory.
- 2) Made it possible to use different disk drives for the off-line
- reader and for MFS.
- 3) When OL.BAT finished input of message header data, control was
- left at the Utility Menu. This version ends at the Main Menu
- 4) Documentation was revised to emphasize operation of the system
- in the preferred manner using OL.BAT for data entry and using a
- Script command in Alpha 4 to initiate a lookup.
- 5) Set up a Browse table option to place less-important
- information, i.e. File Name and message number and date/time on
- the right-hand side. Include comments in documentation.
- 6) Fix last comment box in OLTODB. Reference to script names not
- quite right.
- 7) Include a Work Sheet for users convenience in installation.
- 8) Modify scripts so a single version is called using either
- Alpha 4 Vers. 2.0 or 2.1.
- 9) Modify lookup scripts to include shell to DOS, and dialog box
- on what to do next.
- 10) Include comments in documentation to save message packet from
- communications system directory into off-line reader directory.
- 11) Add short pause after every seven messages entering the Alpha
- 4 data base.
- 12) Fix MFINSTAL to copy proper Alpha 4 version of MSG.SCP into
- data-base directory.