home *** CD-ROM | disk | FTP | other *** search
- Blackout - built-in module from BlitzBlank:
- -------------------------------------------
- This one is always available and will simply open a black screen in the
- screenmode of your choice with one bitplane.
-
- Aquarium - Copyright by Thomas Boerkel:
- ---------------------------------------
- Aquarium shows fishes swimming around on your screen. It opens two screens
- (doublebuffering) of your selected screenmode in 8 colors. In the
- config-window, you choose the number of fishes. Graphics by Michael Weber.
- Note: Aquarium uses lots of CHIP-RAM and is not compatible with graphic-
- cards.
-
- Crumble - Copyright by Thomas Boerkel:
- --------------------------------------
- Crumble "crumbles" the actual screen. Choose the speed in the
- config-window.
-
- Fade - Copyright by Thomas Boerkel:
- -----------------------------------
- This module softly fades out your current screen. The percentage of
- the remaining brightness can be configured in the config-window from
- 0% to 99%. Fade takes advantage of AGA for smoother fading.
-
- Flash - Copyright by Thomas Boerkel:
- ------------------------------------
- Flash shows flashes in the dark. The max. number of flashes can be chosen
- in the config-window.
-
- Lines - Copyright by Thomas Boerkel and Juergen Denner:
- -------------------------------------------------------
- Lines draws a couple of colored lines on a black screen in the screenmode
- of your choice. In the config-window, you choose the number of lines to
- draw. The draw-algorithm is from Juergen Denner.
-
- Melt - Copyright by Thomas Boerkel:
- -----------------------------------
- Melt "melts" your actual screen. In the config-window you choose the
- size and speed.
-
- Mosaic - Copyright by Thomas Boerkel:
- -------------------------------------
- Mosaic puzzles your actual screen. In the config-window you choose the
- size and speed.
-
- Pyro - Copyright by Thomas Boerkel and Wolfgang Boerkel:
- --------------------------------------------------------
- Pyro shoots fireworks on a black screen in the screenmode of your choice.
- In the config-window you can set the number of flares and the
- doublebuffer-option. Doublebuffer makes things a bit smoother but costs
- double amount of CHIP-RAM and is a bit slower because it tries to keep in
- sync all the time. Mathematics by Wolfgang Boerkel.
- Note: Pyro is not compatible with graphic-cards. Use Pyro_GC instead.
-
- Pyro_GC - Copyright by Thomas Boerkel and Wolfgang Boerkel:
- -----------------------------------------------------------
- Just the same as Pyro, but compatible with graphic-cards.
-
- Random - Copyright by Thomas Boerkel:
- -------------------------------------
- This "module" runs randomly the others. You can choose which other modules
- to run in Random`s config-window.
-
- Spot - Copyright by Thomas Boerkel:
- -----------------------------------
- Spot moves spotlights over your actual screen. You will notice that
- changes of that screen can also be seen, if "Update" is activated.
- Spot only works, if it can open a screen with one bitplane more than the
- screen it is blanking. Otherwise it will simply show a black screen. In
- Spot`s config-window you can choose the speed of the spotlights, the
- number, the size, fading and the Update-option (disables fading).
- Note: If you want more than 1 spotlight, it uses double amount of CHIP-RAM.
- Note2: If Spot hangs sometimes on your system, then please turn Smooth off,
- try a smaller size or use more than 1 spot.
-
- Tiles - Copyright by Thomas Boerkel:
- -----------------------------------
- Tiles will devide your actual frontscreen in many pieces and will move them
- around. In the config-window you can choose a border for the pieces and the
- speed of movement.
-