home *** CD-ROM | disk | FTP | other *** search
-
- ADDING HS/LINK TO MARKMAIL
- TESTED WITH MARKMAIL FOR GAP V1.05 AND HS/LINK V1.0ßD2
-
- 1) Make sure HSLINK is in your PATH.
- 2) Run MMSM, Go into the Configuration under the section marked
- "Protocols" and add the following for HS/Link
-
- 12/08/91 MarkMail System Manager 4:42 pm
- About Config Users Quit
- ┌────────────────────────────────────────────────────────────────────┐
- │ Macros: #F# - Filename of Packet #P# - Com Port Page 1 of 5 │
- │ #S# - Computer/Modem Speed #N# - Node Number │
- │ #C# - Modem/User 'Connect' Speed │
- │ │
- │ 1 Letter: H Name: HS-Link ARQ Req?: N │
- │ Send Command Line: HSLINK -P#P# -! -NT -NV -NU #F# │
- │ Recv Command Line: HSLINK -P#P# -! -NT -NV │
- │ │
- │ 2 Letter: Y Name: YmodemG ARQ Req?: Y │
- │ Send Command Line: DSZ sb #F# │
- │ Recv Command Line: DSZ rb │
- │ │
- │ 3 Letter: Z Name: Zmodem ARQ Req?: N │
- │ Send Command Line: DSZ sz #F# │
- │ Recv Command Line: DSZ rz #F# │
- └────────────────────────────────────────────────────────────────────┘
-
- As long as you do exactly as above, everything will work. A few
- notes about the Send Command line. In the line (shown above) that
- says -NU this will stop simultainous uploads. As soon as Mark makes
- a few cahanges to allow bi-directional file transfers change this
- to "-U." <-Period is NOT optional.
-
- If you are getting errors during uploading or downloading you
- may need to add the -HS parameter to the command line. Check your
- HS/Link Documentation for more information on this and other options.
-
- Instructions from Carl Curling, @ Locksoft BBS. (714) 766-8219.
-
-