home *** CD-ROM | disk | FTP | other *** search
- THE FRONT OFFICE tm
- You will require 640,000 characters of Ramdom Access Memory to run TFO. You
- may install the Shareware version on either a hard disk or on a 720k diskette
- laptop computer. The Commercial version will only run on a hard disk. In either
- case type "install" from the A: prompt with diskette 1 in drive A. The instal-
- lation program on the diskette will copy the files from each diskette, prompt-
- ing you when to insert the remaining diskettes. Please pay close attention to
- the directions as you proceed with the installation. In the case of 720k lap-
- tops, be sure to have two (2) formatted disks ready with one inserted in drive
- B:. After the files are copied type TFO to begin. Drive and directory titles
- will be confirmed and the files will be initially indexed.
-
- The TFO.BAT file has the line 'SET CLIPPER=V006;R132' in it. It reserves 132K
- of RAM when TFO is delivered. This amount of RAM runs The Write Perspective in
- RAM with TFO. You will need the CONFIG.SYS file to have two lines: 'BUFFERS=8'
- and 'FILES=20'. Use The Write Perspective to check these files. Be sure to
- reboot your computer after making any changes to your Autoexec.bat and Config.
- sys files. If TFO will not run in your computers available memory: 1. Be sure
- that no TSR programs are running. 2. Change the SET CLIPPER line to read 'R032'
- and then use your own word processor with TFO. You need about 585,000 char. of
- RAM to presently run TFO with The Write Perspective or with PC-Write 2.7., less
- with other word processors. You can reach us on 603-938-2127. We also do custom
- programming and consulting.