home *** CD-ROM | disk | FTP | other *** search
- GRABBER.SYS
-
- You use the GRABBER.SYS scanner driver with the DAK Soul
- Snatcher Video Grabber VG-100.
-
- To manually add the device driver to your CONFIG.SYS, use a text
- editor to type the entry as it appears below. Be sure to
- include a path if the scanner driver is not in your root directory.
- Remember to include additional parameters when necessary.
-
- CONFIG.SYS entry:
-
- device=GRABBER.SYS
-
- This scanner only uses port address 3EFH (Port 3EF hexadecimal).
-
- Available options and the parameters you should add to your
- CONFIG.SYS:
-
- Screen Resolution set: The default for this scanner.
- Use Screen Resolution set to use
- resolutions for output that will
- only be viewed on-screen.
-
- Printer Resolution set: Add the parameter /P to your CONFIG.SYS.
- Use Printer Resolution set to use
- resolutions for printed output.
-
- Settings supported by this scanner:
-
- Brightness 10 settings
- Contrast 10 settings
- Colors B&W, 4 gray levels, 16 gray levels, 256 gray levels
- Halftones 4 options
- Resolutions Screen Set: (default)
- 80x80, 80x58, 40x33, 32x38
- Printer Set: (with /P option in CONFIG.SYS)
- 300x300, 200x200, 180x180, 32x 38
-
-