home *** CD-ROM | disk | FTP | other *** search
- FJ3191.SYS
-
- You use the FJ3191.SYS scanner driver with the Fujitsu 3191 scanner.
-
- To manually add the device driver to your CONFIG.SYS, use a text
- editor to type the entry as it appears below. Be sure to
- include a path if the scanner driver is not in your root directory.
- Remember to include additional parameters when necessary.
-
- CONFIG.SYS entry:
-
- device=FJ3191.SYS
-
- Addresses Available port addresses
- --------- ------------------------
- Use Defaults Port CA000.
- Port CA000 The default for this scanner.
- Port C8000 Add the parameter /C8 to your CONFIG.SYS entry.
- Port CE000 Add the parameter /CE to your CONFIG.SYS entry.
- Port DE000 Add the parameter /DE to your CONFIG.SYS entry.
-
- The options for this scanner. You can attach up to seven Fujitsu
- 3191 scanners to your system, in a series. Each scanner is
- identified by an ID number. Select the ID number of the
- scanner(s) you are installing.
-
- Use Defaults There is no default.
-
- ID 0 Add the parameter /I0 to your CONFIG.SYS entry.
- ID 1 Add the parameter /I1 to your CONFIG.SYS entry.
- ID 2 Add the parameter /I2 to your CONFIG.SYS entry.
- ID 3 Add the parameter /I3 to your CONFIG.SYS entry.
- ID 4 Add the parameter /I4 to your CONFIG.SYS entry.
- ID 5 Add the parameter /I5 to your CONFIG.SYS entry.
- ID 6 Add the parameter /I6 to your CONFIG.SYS entry.
-
- NOTE: The character following the slash is the letter "I."
-
- Settings supported by this scanner:
-
- Brightness 7 levels in B&W
- Contrast 7 levels in B&W
- Colors B&W, 256 gray levels
- Halftones Bayer, Coarse Fatting, Fine Fatting, Mesh
- Resolutions 300x300, 150x150, 120x120, 75x75
-
-