100 Clique neste botπo para instalar o programa |1 no diret≤rio especificado.
101 Clique neste botπo para instalar o programa |1 em seu computador.
200 Bem Vindo ao programa de Instalaτπo de |1 .
300 Por favor, entre o drive e o caminho onde estπo localizados os arquivos de instalaτπo de |1 .
301 Entre ou selecione o diret≤rio onde vocΩ deseja instalar este programa.
302 Diret≤rio onde serß instalado o programa:
303 nπo existe. VocΩ deseja que o programa de instalaτπo crie este diret≤rio para vocΩ?
304 Alterar Diret≤rio
305 Instalando de
400 Erro ocorrido na tentativa de calcular o espaτo requerido em disco..
401 Nπo pode ler o Drive
402 Por favor, verifique se o disco estß no drive e estß livre de erros.
403 Nπo pode abrir o arquivo:
404 Nπo pode ler o arquivo:
405 Nπo pode gravar o arquivo:
406 Por favor, certifique-se de que o drive de destino possua o espaτo mφnimo requerido para a instalτπo deste programa.
407 Nπo pode criar o diret≤rio:
411 VocΩ realmete deseja cancelar?
412 Config de |1 foi interrompido antes que o programa fosse instalado por completo.
413 VocΩ pode executar o Config de |1 outra hora para completar a instalaτπo.
414 Config ainda nπo acabou de instalar este programa.
415 Se vocΩ encerrar agora, |1 nπo serß completamente instalado.
416 Encerrar o Config?
417 Config de |1 foi concluφdo com sucesso.
418 Config de |1 nπo foi concluφdo com sucesso.
419 Error determining allocation unit for drive
420 is in the Setup source files directory. Please type a different directory.
421 Could not create the file named:
422 Please verify that destination drive is not write protected.
423 Por favor insira o disco com a etiqueta:
424 'Disco
425 ' no drive
426 Seτπo:
427 Invalid line in setup information file!
428 The specified directory:
429 is invalid, incomplete, or write protected. Please type a full path with drive letter; for example 'C:\APPS'.
430 Este diret≤rio nπo existe!
431 Invalid Directory Name
432 The destination file is write protected.
433 O Arquivo de destino estß em uso. Certifique-se de que todos os outros aplicativos estejam fechados.
434 Out of space on destination drive
435 An access violation occurred while copying the file.
436 A sharing violation occurred while copying the file.
437 Out of memory trying to copy the file.
438 Cannot create temporary file.
439 Cannot delete existing destination file.
440 Cannot rename temporary file.
441 Config nπo pode ler os arquivos de origem.
442 Cannot read destination file attributes.
443 Erro interno de c≤pia.
444 The file could not be installed.
445 Please check the connection to drive
446 Se vocΩ ignorar o erro de c≤pia, o arquivo nπo serß copiado. O Programa poderß nπo funcionar corretamente. VocΩ realmente deseja ignorar este erro?
447 The drive specified by the 'TMP' or 'TEMP' environment variable is not ready.
448 The line 'device=vshare.386' may need to be added to the [386Enh] section of your SYSTEM.INI file to ensure proper operation of your new software.
449 Cannot read network path '|1'.
450 Please verify that this path is correct and that you have permission to access it.
451 Application removal logfile '|1' not found. Unable to continue.
452 Invalid command-line parameters. Unable to continue.
453 Application removal executable '|1' not found. Unable to continue.
454 Desinstar |1
455 Error registering the application removal executable with Windows
456 Error creating a Program Manager icon for the application removal utility
457 Setup is about to replace a pre-existing file(s). This may cause loss of data for an existing application.
458 Installing over an existing installation without first removing it may damage that installation or cause future attempts to remove the installation to fail.
459 Cancelar o Config?
460 Please run setup again and select a new location for application files.
461 Are you sure you want to continue?
462 An error occurred trying to update the Windows registration database.
463 Microsoft Shared\
465 An error occurred trying to create the program group '|1'
466 An error occurred trying to create a program icon for '|1'
467 An error occurred trying to copy '|1' to the application directory
468 The file '|1' could not be registered because it was not found.
469 Windows was unable to run the program '|1'. Your system may be low on memory, or the program may not have been found.
470 Error: 'SETUP.LST' contains no information on how to register the remote component '|1'. This information should have been found in a '|2' key in SETUP.LST
471 Gerenciador de Programas
472 Unexpected error creating '|1':
473 Cannot copy file, Destination Path is too long.
474 Cannot create Uninstall Icon, Destination Path is too long.
475 No icon was specified in SETUP.LST for |1. Do you want to continue without creating this icon? Click Yes to continue. Click No to Exit Setup.
500 Setup was unable to determine a valid default destination directory. You will need to specify a destination directory.
501 O Config estß verificando o espaτo disponφvel no disco...
502 Config estß criando φcones do programa...
503 O Config estß atualizando o seu sistema...
504 The name of the application's executable file could not be determined.
505 Config de |1
506 The SETUP.LST file is corrupt or could not be found.
507 An unexpected setup error has occurred!
508 Setup customization error: An icon needs to be created for |1, but no folder or Program Manager group was created for this purpose.
509 Setup error: Missing 'CommitAction()' or 'AbortAction()'.
510 Remote Automation Management
511 Automation Manager
512 RemAuto Connection Manager
513 Warning: It is recommended that you install Service Pack 2 for Windows NT 4.0. This application may not work properly without it.
600 Error determining disk space free for drive
701 Diret≤rio:
702 &Alterar Diret≤rio
703 Sai&r do Config
704 Para iniciar a instalaτπo, clique no botπo a baixo.
705 Cancelar
706 Arquivo de Destino:
707 &Instalar Agora
708 A<erar Drive
709 Drive
710 Espaτo Disponφvel
711 Espaτo Requerido
712 Espaτo Requerido
713 Nπo hß espaτo em disco suficiente.
714 OK
715 Dri&ves:
716 &Diret≤rios:
717 &Caminho:
718 O config nπo pode instalar arquivos de sistema ou atualizar arquivos compartilhados se eles estiverem em uso. Antes de continuar, recomendamos que feche todos os aplicativos em uso.
719 Clique aqui para iniciar a instalaτπo
800 |1 - Escolha o Grupo de Programas
801 O Config irß adicionar os icones deste programa no φtem selecionado. VocΩ pode entrar um novo nome para adiconar os arquivos de |1 .
802 &Grupo de Programa:
803 Gr&upos Existentes:
804 Continu&ar
805 A program group name must be less than |1 characters long and cannot contain any of the following characters: |2
806 "][,)(
900 Network &Address
901 Network &Protocol
902 &Continuar
903 Sai&r do Config
904 Remote ActiveX Component Configuration
905 Please fill in the requested configuration information about the following remote component:
906 The protocol sequence |1 (|2) is not supported or available on this machine
907 The protocol sequence '|1' ('|2') is invalid
908 An unexpected error occurred while determining the protocol sequences available on this machine
909 Setup error: An error occurred trying to read protocols from the SETUP.LST file.
910 None of the protocols needed by this application appear to be available or installed on this machine.
911 In order to run Setup successfully, you will need to first install one of the following network protocol sequences:
912 This application will not be able to access the remote component '|1' until the protocol '|2' is installed.
950 MS Sans Serif
951 8
952 False
953 Arial
954 System
2000 File currently on disk was already up to date
2001 File was not found or was an older version -- new file copied
2002 ERRO:
2003 IMPORTANTE:
2004 DURING THIS ACTION:
2005 Error writing to logfile '|1'
2006 Setup fatal error: Unable to generate installation log file.
2007 PLEASE DO NOT MODIFY OR DELETE THIS FILE!
2008 This file contains information about the installation of an application.
2009 It will be used to automatically remove all application components from your computer if you choose to do so.
2010 There was an unexpected problem trying to create or write to the logfile '|1'. Error number is |2.
2011 Out of memory trying to create or write to the logfile '|1'
2012 User Responded with '|1'
2013 Error attempting to run the application removal program to remove temporary installation files.
2014 O config irß iniciar o utilitßrio de remoτπo para remover os arquivos instalados temporariamente.
2100 OK
2101 Cancelar
2102 Abortar
2103 Novamente
2104 Ignorar
2105 Sim
2106 Nπo
2107 (Desconhecido)
2200 Erro ocorrido durante a tentativa de registrar o arquivo '|1'
2201 Unexpected error while registering file '|1'
2202 Could not initialize OLE in order to register file '|1'
2203 LoadLibrary() failed while registering file '|1'
2204 No entrypoint for DllRegisterServer() was found in '|1'
2205 DllRegisterServer() in the file '|1' returned failure
2206 One possible cause for this error is that RPC may not be installed on your computer.
2207 If this is the problem, then you will need to exit Setup, install RPC, and restart Setup.
2208 The file '|1' was not copied because it is intended for use under Windows NT 3.51 only. It is not needed under Windows 95 or NT 4.0.
2209 \/:*?"<>|
2210 Disco
2211 Cannot find the source file '|1' to install.
2212 Could not register the TLB file '|1'.
2213 The file '|1' was not copied because it is intended for use under Windows 95 only. It is not needed under Windows NT 3.51 or 4.0.
2214 The file '|1' was not copied because it is intended for use under Windows 95 and NT 4.x only. It is not needed under Windows NT 3.51.
2215 The file '|1' was not copied because it is intended for use under Windows NT 3.51 only. It is not needed under Windows 95 or NT 4.x.
