home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: rec.radio.info
- Path: sparky!uunet!cs.utexas.edu!uwm.edu!linac!att!cbnewsc!cbfsb!cbnewsb.cb.att.com!wa2ise
- From: wa2ise@cbnewsb.cb.att.com (robert.f.casey)
- Subject: ft890 mod file
- Message-ID: <1993Jan24.005316.5410@cbfsb.cb.att.com>
- Keywords: mods
- Sender: news@cbfsb.cb.att.com
- Organization: AT&T
- Date: Sun, 24 Jan 1993 00:53:16 GMT
- Approved: wa2ise@cbnewsb.cb.att.com
- Lines: 34
-
- copied from packet:
- Msg# T{ize #Rd Date Time From MsgID To
- 32972 BF 2276 0 13-Jan 1142 F1LOU 30527_ON7RC YAESU@WW ()
- Sb: FT890 MODS
-
- YAESU FT890/AT mod. TX 1,5 to 30 MHZ.
- ======================================
-
- - Disconnect FT890 from all connections.
-
- - Open tranceiver like explained in your "OPERATING MANUAL".
-
- - Locate on the "CONTROL UNIT" jumper point JW 3001 and close it with solder.
-
- - Close tranceiver back and reconnect power.
-
- - Push PROC, AGC-F, IPO, ATT while power ON.
-
- - Now the display shows two digits of numbers and tree of letters (i.e 13 OFF)
- Rotate main knob and set the display to "02 ON". Now press the PROC button.
-
- - Power OFF and then back ON. It's all!
-
- - Now every time you want, you can change the programation, but you will
- allways lose the memories.
-
- - Other settings than "02 ON" are of no interest. This one give you 100 w
- and automatic antenna tuning between 1,5 and 30 mhz.
-
-
- 73's de Phil, F1LOU @ ON7RC.BT.BEL.EU
- =========================================================================
- Note: I haven't tried or verified this, proceed at your own risk, and
- do not transmit outside of legal bands! WA2ISE
-