home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky misc.forsale.computers:46157 alt.folklore.computers:19263 comp.sys.tandy:2110
- Path: sparky!uunet!nwnexus!jhgrud!eskimo!lorc!lowen
- From: lowen@lorc.eskimo.com (Lamar Owen)
- Newsgroups: misc.forsale.computers,alt.folklore.computers,comp.sys.tandy
- Subject: Various old computer items for sale
- Keywords: Sale Tandy 6000 PDP-11/23+ Terminals Printers
- Message-ID: <UDDYrA+FBh107h@lorc.eskimo.com>
- Date: Fri, 22 Jan 93 12:37:24 -0500
- Reply-To: lowen@lorc.eskimo.com
- Followup-To: poster
- Organization: LORC Enterprises
- Lines: 165
-
- Note: Article is cross-posted to several newsgroups. Followups should go to
- email. This article is relevant to each of these newsgroups. For all readers,
- if you don't want to see the list of forsale items, just press 'n' (if using a
- standard newsreader).
-
- The following equipment that is for sale is, unless noted, in good, working
- condition; however, I make no claims regarding its suitability for any
- particular task of any sort. All items sold AS-IS with no warranty express or
- implied. All prices are negotiable unless marked 'firm' after the price. I
- cross-posted to alt.folklore.computers since most of this equipment will only
- be of collector interest. Buyer agrees to pay shipping, terms COD. Prices listed
- are prices per unit, unless otherwise noted. Manuals are NOT included, unless
- otherwise noted. Best offer in two weeks gets the goods. Please allow 6-8
- weeks for shipment--I am a busy individual, and this is definitely not getting
- me rich. :-)
-
- Why am I selling all this collector's item equipment? Simple: I'm getting
- married in a few weeks, and need to get rid of all this stuff. Believe you
- me: I don't WANT to get rid of this stuff, it's just simply that there will be
- no room when my wife-to-be moves in.
-
- Traders take note: I am interested in AT&T 3B1 equipment. If you want rid of
- a 3B1, boards, software, or other hardware, AND want something in this list,
- make an offer. I am also interested in 286 and above IBM-PC compatbiles.
-
- Prices in US currency, current exchange rate.
-
- ------------------------------------
- Equipment Category: PDP-11 stuff.
-
- 1 $50 M3106 DZV-11 4-line async mux, with cable and connectors, with
- bracket for BA23. Q-BUS
-
- 1 $50 RQDX3 (M8639) RD/RX Q-BUS controller with all cables.
-
- 1 $25 RX50 dual floppy drive.
-
- 1 $75 M8067 MSV-11?? 512K Q-BUS DRAM card.
-
- 1 $125 M8189 PDP-11/23+ CPU card, with console port cables and
- bracket for BA23. Includes MicroPDP 11 manual.
-
- 20 $7.50 Ten pack RX50 disks. These have data on them, but can easily
- be wiped.
-
- 1 $100 PDP-11/03 complete sans rack and CPU case frontplate.
- (LSI-11 CPU, KEV-11 FIS Microm, REV-11C bootstrap, MSV-11D (?)
- (M8044) 64Kbyte MOS RAM, DLV-11E serial line, RXV11 disk
- controller with RX-01 dual 8" floppy subsystem. DRV-11P
- parallel interface. 4 quad-slot (8 dual) backplane, card cage,
- and power supply.)
-
- 1 $50 Partial PDP-11/03, includes all of the above sans RX-01 disk
- drives (has RXV11 controller, though), DLV-11E, and DRV-11P
-
- 1 $50 SKYFFP-Q-02 Floating Point accelerator board. Uses Weitek WTL
- 1516 multiplier chip and 4 AMD2900 series bitslices. (16 bit
- FPA) (1 quad Q-bus card)
-
- 1 $50 Integrated Solutions IS-4HDC ST-506/ST-412 MFM hard disk
- controller. Does 4 drives. quad Q-bus card.
-
- 1 $50 Webster SDZV-11/02 DZV11 compatible serial line MUX. dual
- Q-bus card.
-
- 1 $50 Integrated Solutions QIC-02 Q-bus tape interface. Don't know
- what tape drive this emulates, but controls just about any
- QIC-02 interface tape unit.
-
- 1 $25 Integrated Solutions IS-68K/IS68-XM board set minus 68010-10
- CPU chip. Not really PDP-11 related, but is still a Q-bus
- item. 2 quad Q-bus cards, no interconnect cables.
-
- 1 $50 Netcom products KPV-1180 parallel card. This was connected to
- an Epson parallel printer, so I assume that's what it is.
-
- Equipment Category: VAX 11/750 stuff.
-
- 1 $50 11/750 256Kx39 bit memory card. Hex module, uses 4164 RAM.
- M8728-AH.
-
- 5 $100 Same as above, but NEW and in DEC packaging, with seals intact.
-
- Equipment Category: Peripherals.
-
- 1 $350 Tektronix 4107 graphics terminal with all manuals. Color,
- 640x480x64 color resolution.
-
- 1 $100 Tek 4662 plotter. Works well, needs a new static hold-down
- power unit. With user's and service manuals.
-
- 1 $50 Corvus 10MB disk subsystem with IBM-PC interface card and DOS
- 1.x drivers. This is a collector's item, using a Z80B at 6
- MHz in the IMI intelligent drive. The drive had more smarts
- than the typical PC of the day! 8 inch platters, of course.
-
- 1 $100 NEC SpinWriter 8800 wide carriage, serial interface. What can
- be said about this perennial workhorse that hasn't already
- been said? Thimble printer, includes manual and several ribbons.
-
- 6 $25 Tandon TM101-3 80 track, singl-sided, full-height 5.25 inch
- floppy drives. Features buffered seek (yes, on a floppy!).
- In manufacturer's Styro-Foam (TM) packaging.
-
- 1 $100 HP-125 Terminal/micro. Runs CP/M on dual Z80's. Uses HPIB
- disk drives, not included. :-). (I don't have the CP/M disks,
- nor the drives... Otherwise I'd sell them too).
-
- 3 $50 Tymshare 125/TI Silent 700 printing terminals with acoustic
- couplers. In breifcase.
-
-
- Equipment Category: TRS-80 stuff. (sob. I never thought I'd sell this stuff.)
-
-
- 1 $50 TRS-80 Model 4. Two single sided floppies. 64K RAM. No high
- res. RS-232 port. TRSDOS 6.2, standard manuals.
-
- 1 $200 Tandy 6000, with manuals, TRS-DOS 16, Xenix 3.2, 15MB hardisk
- 512K RAM. Dev set on hard disk--floppies were lost, but I
- made a backup set before the fire.
-
- 1 $100 TRS-80 model 16B, with manuals. TRS-DOS 16, two floppies. 256K
- RAM.
-
- 3 $50 Tandon TM848-02 slimline 8 inch disk drives for Tandy 6000. Working
- condition.
-
- 1 $50 Board assortment for T6K--includes a CPU card w/o CPU, several
- memory cards, and a couple of hard disk controllers. Condition
- of cards unknown. $50 for the lot.
-
- 3 $25 38W Astec power supply for Model 3/4.
-
- 1 $50 65W Astec power supply for Model 3/4.
-
- 2 $40 Model 12/16B/6000 Z-80 main boards. Unknown condition.
-
- 4 $20 Model 4 Non gate array main logic boards. 16K and 64K assortment.
- Unknown condition. Upgrade your model 3 to a model 4 with this
- board!
-
- 1 $25 Working, like new, RS-232 interface card for Model 3/4 NG. Includes
- flat cable.
-
- 1 $50 Tandy 6000 service manual.
-
-
- Equipment Category: Misc
-
- 1 $150 Altos Z-80 based CP/M system. Two 8 inch SS floppies. 64K RAM.
- Two serial ports, one parallel port. Includes a box of disks,
- including CP/M-boot. Also includes some CP/M manuals. This box
- is heavy, and has a wonderful power supply (which is why I'm
- wanting so much for it).
-
-
- <----End of forsale list---->
-
- --
-
- Lamar Owen, Systems Consultant | If there were a tax on syn,
- GE Lighting Systems, Hendersonville, NC, USA | we'd all be broke.
- --------------------------------------------------------------------------
- My opinions are not those of GE and do not reflect GE policy in any way.
-