home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!charon.amdahl.com!amdahl!rtech!decwrl!hal.com!olivea!spool.mu.edu!yale.edu!ira.uka.de!math.fu-berlin.de!news.netmbx.de!Germany.EU.net!mcsun!sun4nl!star.cs.vu.nl!newshost.cca.vu.nl!valke
- From: valke@cca.vu.nl (Peter Valkenburg)
- Newsgroups: comp.sys.sequent
- Subject: Re: Telnetd under Dynix
- Message-ID: <1993Jan26.111809.13142@cca.vu.nl>
- Date: 26 Jan 93 11:18:09 GMT
- References: <1993Jan25.102852.22031@rat.csc.calpoly.edu>
- Organization: VU Amsterdam - dienst CCA
- Lines: 27
-
- guy@library.calpoly.edu (Guy Martin) writes:
-
- >This is a plea on my part for *anyone* that has been able to compile BSD
- >source for telnetd under Dynix (we are running 3.0.17.9) successfully.. We
- >have a working binary for telnetd, but I need to be able to compile telnetd
- >source for a network connectivity project I am working on.
-
- >Also, even though it is a long shot, if there are any Sequent people out there
- >who could give me hints (or the Sequent telnetd source code #:-)) on this, I
- >would be eternally grateful.. Thanks much!!
-
- We needed telnetd to behave slightly different for a special project on a
- Sequent and obtained the 4.3BSD source. It compiles without problems.
-
- You should be able to get the source from a 386BSD distribution site on the
- net (e.g. agate.berkeley.edu).
-
- BTW, the Sequent runs DYNIX(R) V3.0.17.9 and our telnetd.c's sccsid line says:
- @(#)telnetd.c 5.18 (Berkeley) 5/12/86
-
- Hope this helps,
-
- ---------
- Peter Valkenburg
- Dept. Computer Affairs
- Vrije Universiteit Amsterdam
- The Netherlands
-