home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.novell
- Path: sparky!uunet!gumby!yale!cs.yale.edu!mikef
- From: mikef@som.yale.edu (Michael Fanara)
- Subject: Re: server crashing
- Message-ID: <1993Jan27.152104.21614@cs.yale.edu>
- Sender: news@cs.yale.edu (Usenet News)
- Nntp-Posting-Host: homey.som.yale.edu
- Organization: Yale University School of Management
- References: <ebs.60.727451451@lilly.com> <1993Jan19.155536.10982@cs.yale.edu>
- Distribution: world,local
- Date: Wed, 27 Jan 1993 15:21:04 GMT
- Lines: 51
-
- In article <1993Jan19.155536.10982@cs.yale.edu> mikef@som.yale.edu (Michael Fanara) writes:
- >Fellow netters,
- >
- >I was wondering if anyone could help? I have a small 10-user version of 3.11
- >running on ethernet with Model 80 8/MB RAM as the server. It seems that the
- >server has been crashing about 1 or 2 times a week. It's not crashing hard,
- >but never the less, still crashing.
- >
- >The problem seems to be that the server can not write to the SYS volume. The
- >files that seem to pop up in the vol$log.err file quit often are the
- >Q_000E.SRV and .SYS files. The error message is as follows:
- >
- >Volume mount had the following errors that were fixed.
- >Problem with file Q_000E.SRV (TTS file was not changed) length kept=0 had
- >allocated=4096.
-
- I'm also getting errors like the following:
-
- 1.1.138 Insufficient directory space or memory to preserve SYS :Backout.TTS
- during file erase
-
- 1.1.45 Error writting to directory on CDO/SYS:
-
- I'm not receiving any errors when I run vrepair. ?
-
- I'm also getting pre-write and pre-read errors on the same volume
-
- I don't see the actual ABEND message because by the time I get to the server
- console, the screen has scrolled with all of the above messages.
-
- >
- >I know these files are associated with the print queues, but I can't figure
- >out why the server can't write to them. I've looked at the Re-directed blocks
- >but there are none shown. I've been using Pserver.exe 1.22 for some time now.
- >Is there a problem with 1.22? I did switch from 1.21.
- >
- >The printer - HPIII is directly attached to the server and does not get
- >overused. Would anyone have some suggestions on what could be the problem?
- >All suggestions would be very appreciated.
- >
- >Thanks in advance
- >
- >Mike Fanara
- >Yale School of Management
- >mikef@homey.som.yale.edu
- >
- >
- >
- >
-
-
-