home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.novell
- Path: sparky!uunet!srvr1.engin.umich.edu!saimiri.primate.wisc.edu!doug.cae.wisc.edu!umn.edu!pc100.neuro.umn.edu!THOMASG
- From: THOMASG@staff.tc.umn.edu (Thomas D.Gasser)
- Subject: Arcserve "Losing" tape Drive
- Message-ID: <THOMASG.1441.0@staff.tc.umn.edu>
- Sender: news@news2.cis.umn.edu (Usenet News Administration)
- Nntp-Posting-Host: pc100.neuro.umn.edu
- Organization: Department of Neurosurgery, University of Minnesota
- Date: Thu, 21 Jan 1993 19:55:45 GMT
- Lines: 25
-
- Have a rather interesting problem. Running an Everex 486/33 Cube EISA machine
- as a 3.11 server. Adaptec 1740 controller running 2 Seagate 94601-15 drives
- (Devices #0 and #1) and a EXCEL DAT (this is the WANGDAT that is oemed from
- WANGTEK)(Device #3).
-
- On bootup controller card reports all three devices. Loading tapedrv.nlm
- works fine. It finds the tape drive reports the name of the tape in the drive.
- After a while, (any where from 1 hour to 3 days) if you try to do a backup or
- any ARCSERVE stuff to the tape drive it comes back with a ffff message from
- the drive. You can then unload Arcserve.nlm and the tapedrv.nlm fine but if
- you try to reload the tapedrv.nlm it reports that the tape drive is not found.
-
- Any ideas in Net land?
-
-
-
-
- *********************************************************************
- * Thomas D. Gasser *
- * Department of Neurosurgery ******* ****** *
- * University of Minnesota *** *** *** *** *
- * (612) 624-4427 *** ***** *** *
- * E-Mail: THOMASG@STAFF.TC.UMN.EDU ***** ***** *
- * *
- *********************************************************************
-