home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!pageworks.com!world!eff!sol.ctr.columbia.edu!news.unomaha.edu!nevada.edu!jimi!tcs!elenay_creations
- Message-ID: <1993Jan26.095222.26274@tcs.las-vegas.nv.us>
- Newsgroups: comp.sys.mac.hardware
- Distribution: world
- From: elenay_creations@tcs.las-vegas.nv.us (Anthony D. Saxton)
- Organization: Cyber Sanctum
- Date: Tue, 26 Jan 1993 09:52:22 PST
- Subject: Re: SE/30 memory upgrade...
- Lines: 15
-
- >> I've got a SE/30 with 4Mb of RAM.
- >> This month I got more 4Mb (4 1Mbit Clearpoint SIMMs) and tried to install
- it
- >>on the Mac. It didn't work! When I switch the power on, the Mac emits 3 or 4
- >>sounds, and locks...
-
- Remove the last 2 SIMMS and try to boot with just the first 2. Then remove
- those and replace them with the 2 previously removed. If it fails to boot in
- either situation, you've narrowed it down to a bad SIMM in the pair. Simply
- swap, to determine just which one is the culprit.
-
- Good Luck,
-
- Anthony D. Saxton
- Elenay* Creations
-