home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.mac.hardware
- Path: sparky!uunet!pageworks.com!world!eff!sol.ctr.columbia.edu!spool.mu.edu!agate!ames!pacbell.com!rtech!amdahl!amdcad!angelo!mgleeson
- From: mgleeson@angelo.amd.com (Mike Gleeson)
- Subject: Need suggestions/help setting up a network
- Message-ID: <C1J7Cy.L9B@amd.com>
- Sender: usenet@amd.com (NetNews)
- Organization: Advanced Micro Devices, Santa Clara, CA
- Distribution: usa
- Date: Wed, 27 Jan 1993 21:22:09 GMT
- Lines: 14
-
- I'm trying to set up a twisted pair ethernet network between 3 IIci's,
- 3 SE's, a laserwriter II, a laserwriter IIf, and an imagewriter. I
- was wondering if anyone would know the answers to the following:
-
- 1) do I need to buy a hub or can I wire it up like a phone-net network?
-
- 2) do you know of any ethernet cards/adapters for the laserwriters?
-
- 3) do you know of any software products that will make a slaved
- imagewriter available to other nodes on the network?
-
- Thanks for your help!
-
- Mike Gleeson mgleeson@brahms.amd.com
-