home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!munnari.oz.au!manuel.anu.edu.au!huxley!tal691
- From: tal691@huxley.anu.edu.au (Tonio Loewald)
- Newsgroups: comp.sys.mac.hardware
- Subject: Re: Mac 512kE monitor problems....
- Date: 26 Jan 93 10:56:31 GMT
- Organization: Australian National University
- Lines: 25
- Message-ID: <tal691.728045791@huxley>
- References: <1993Jan20.034321.7127@Princeton.EDU>
- NNTP-Posting-Host: 150.203.2.12
-
- Geoff M. Kizer <gmkizer@phoenix.princeton.edu> writes:
-
- >I'm trying to repair a Mac512kE with intermittent monitor problems.
-
- >After the Mac is on for a few minutes, the screen blanks out.
-
- >The owner noticed that a few hits to the side sometimes brings the
- >display up temporarily.
-
- >It seems that the solder joints check out -- any suggestions about where
- >I should look for the problem? Is there a typical reason for the mac
- >internal monitors to fail?
-
- >Thanks.
-
- Um, when my 512kE had similar symptoms, replacing the power supply
- fixed it. I don't know if that helps, but I hope so.
-
- Tonio
-
- --
- Tonio Loewald | tal691@huxley.anu.edu.au
-
- "Yes!! For the hundred and fiftieth time!
- We're burning in hell!!!" (John Callahan)
-