home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.mac.hardware
- Path: sparky!uunet!cs.utexas.edu!uwm.edu!rpi!mustang.stu.rpi.edu!user
- From: johnsh@rpi.edu (Echoes)
- Subject: Re: Apple 13" HiRes RGB Monitor Failure
- Message-ID: <johnsh-220193163209@mustang.stu.rpi.edu>
- Followup-To: comp.sys.mac.hardware
- Nntp-Posting-Host: mustang.stu.rpi.edu
- Organization: Rensselaer Polytechnic Institute
- References: <1993Jan22.151200.3478@afit.af.mil>
- Date: Fri, 22 Jan 1993 21:33:07 GMT
- Lines: 25
-
- In article <1993Jan22.151200.3478@afit.af.mil>, echriste@afit.af.mil (Eric
- R. Christensen) wrote:
- >
- > I have had a MACII with a 13in Apple HiRes Monitor and an 8 bit video
- > card for about 5 years. A couple of weeks ago the monitor quit. When
- > I took the powere supply out it was discoverd that some wires were cold
- > soldered. These wires were resoldered and all worked fine for about
- > 2 weeks. Earlier this week the monitor just shutoff. I restarted the
- > system and the monitor came up fine and stayed on. This morning the
- > monitor again shut off. I shut down and restarted the monitor came up
- > again but then shut down almost immediately and wouldn't restart. I
- > waited about a half an hour and tried it again and it came up ok and
- > has remained on for the last 2 hours.
- >
- > Does anyone have any ideas as to what could be wrong and how to fix it?
-
- I don't know what's happening, but mine's been doing it, too. Someone help
- us!
-
- ==========================================================================
- Hugh Johnson |
- Rensselaer Polytechnic Institute | No text graphics, no quotes. Just
- Troy, New York, USA | pure, unadulterated wasted bandwidth.
- johnsh@rpi.edu |
- ==========================================================================
-