home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!spool.mu.edu!agate!doc.ic.ac.uk!warwick!warwick!not-for-mail
- From: phudl@csv.warwick.ac.uk (Mr S J Liddicott)
- Newsgroups: comp.sys.hp48
- Subject: Have got circuit for IR-RS232 link
- Date: 26 Jan 1993 10:43:13 -0000
- Organization: Computing Services, University of Warwick, UK
- Lines: 200
- Message-ID: <1k34k1INNdd7@emmental.csv.warwick.ac.uk>
- NNTP-Posting-Host: emmental.csv.warwick.ac.uk
-
-
- There has been discussion a few times about giving a PC and IR link
- making data transfer easier. Well I was talking to Tony, a guy who
- wrote a digital circuit simulator, and he said he had MADE such a circuit
- and that he thought it was at seq.uncwil.
-
- Well I never knew about it, and I know some wanted it besides me so I
- post it here.
-
- *----------*-------------------------------------------------------------*
- | Sam Jam|"Never underestimate the importance of a cheap laugh"- |
- | Liddicott| phudl@csv.warwick.ac.uk Plucky Duck TTA |
- *------------------------------------------------------------------------*
-
-
- Article 1129 of comp.sys.handhelds:
- Path: en.ecn.purdue.edu!noose.ecn.purdue.edu!samsung!cs.utexas.edu!sun-barr!olivea!mintaka!bloom-beacon!eru!hagbard!sunic!mcsun!ukc!axion!tharr!pva.bristol.ac.uk
- From: ard@pva.bristol.ac.uk (Tony Duell)
- Newsgroups: comp.sys.handhelds
- Subject: HP48 to RS232 link
- Keywords: HP48 RS232
- Message-ID: <929@tharr.UUCP>
- Date: 30 Aug 90 11:29:24 GMT
- Sender: pm111@tharr.UUCP
- Reply-To: ard@pva.bristol.ac.uk (Tony Duell)
- Organization: Public access to Usenet in the UK
- Lines: 171
-
- I have received many request for the circuit of my HP48 to RS232 decoder/
- Infra-RED link. I have converted the circuit diagram to a printable ascii
- file, writen some instructions, and I'll include them in this posting.
- Please contact me if you have any problems - stuff sent to the net takes
- a few days to find me......
-
- Here it is:
-
- INSTRUCTONS FOR THE HP48SX IR DECODER
- 1) The circuit diagram is attacted to this message, as a printable
- ASCII TTYpic. I should be printable on _any_ printer.
- 2) Construction and layout is not critical and any metohd should work.
- I used Verowire self-fluxing wiring system. I also socketed all the IC's,
- but that too is up to you!
- 3) De-coupling capacitors and power connections are not shown on the circuit
- diagram. Place a 0.1uF ceramic capacitor across the power connections on each
- IC. Also place a 10uF tantalum capacitor across the power connections close
- to the IR transmitter.
- 4) The IR LED and IR phototransistor should be mounted on the front panel of
- the unit. The LED goes on the Left, looking at it from outside. They must line
- up with the ones on you HP48 for transmission to occur at all. The range of the
- unit is about 2".
- 5) The IR LED and phototransistor are critical. I used ones available from
- MAPLIN (see my earlier messages for the address), but the equivalents are:
- Phototransistor Maplin YY66W (Infra Red Sensor) = TIL78
- LED Maplin YH70M (Infre-Red Emitter) = TIL38
- 6) The RS232 port links to the PC, not to the HP48 of course.
- 7) The circuit as given requires a +5V supply only. The MAX232 device (which
- is expensive and hard to obtain) can be replaced by a 1488 (transmitter)
- and 1489 (receiver) devices but then +/-12V are required for the 1488
- 8) Each section of multiple ic's is numbered. 'xx means 74lsxx. A total
- list of ic's required is:
- MAX232, 2*74ls393, 7425 (or 74ls25 if you can get one!), 74ls74, 74ls08, 74ls14
- 74ls04.
- 9) A list of symbols used is: (as some are non-standard to get them into
- printable ascii)
- -\/\/-- resistor
-
- !
- \
- /
- \ resistor
- /
- !
-
- !!
- --!!-- capacitor
- !!
-
- !--!
- +! !+
- -!! !!- Quartz Crystal
- +! !+
- !--!
-
-
- !/
- ! NPN transistor
- !\!
- -
-
- \\
- >>
- ! /
- !/
- !\ IR phototransistor
- ! \!
- -
-
- ! >>
- V//
- --- IR LED
- !
-
- !\
- -! >o- NOT gate
- !/
-
- -!\
- ! )- AND gate
- -!/
-
- -)
- )
- -)--\
- ) >o-- NOR gate
- -)--/
- )
- -)
-
- Good Luck!
- I am on ARD@UK.AC.BRIS.PVA (JANET) = Bitnet ARD@pva.bris.ac.uk
-
- +5
- ----
- ! -----------------------------
- ! ! !
- / ! ----+ o '74
- \ 10k '04 ! '04 '04 '08 /// ! ---------
- \\ / !\ !\ ! !\ !\ +-!D S !
- >> !--------! >o---+--! >o-+-! >o--! >o--!\ ! Q!
- ! / !/ ! !/ !/ !/ ! )-+ ! !o------+
- !/ IR 74ls14 ----------------------!/ ! +- !> R ! !
- !\ P/transistor ! ! --------- !
- !_\! ! ! o +5 !
- ! ---------------------------- ! ! ---- !
- ! ! ! ! ! !
- --- ! ! ----- !
- /// ! ! !
- '393 ! '14 ! !
- ---------- !\ ! !
- ! R ! +- ! >o-+ '25 ! !
- ! A!-+ !/ +-----) ! !
- ! ! ) +---+ !
- ! B!---------------)--\ !\ ! !
- +---!> ! ) >o--! >o--+ !
- ! ! C!---------------)--/ !/ !
- ! ! ! ) '14 !
- ! ! D!---------------) !
- ! --------- !
- +-----------------------------------------------------+ !
- '393 '393 ! !
- 2.45MHz !----! !----! ! !
- '04 !--! '04 '04 ! A! ! A! ! !
- !\ +! !+ !\ !\ ! B! ! B!--+ !
- ----! >o-+-!! !!--+---! >o-----!--! >o---!> C! +-!> C! ! !
- ! !/ ! +! !+ ! !/ ! !/ !R D!-+ !R D! ! !
- ! ! !--! ! ! !----! !----! ! !
- ! 1k ! ! 1k ! ! ! ! !
- -/\/\----+ 2n2 --/\/\-------! --- --- ! !
- ! ! ! ! /// /// ! !
- ------------! !-----------------+ ! !
- ! ! ! !
- +5 ! !
- ---- !! !! 4*2u2 ! !
- ! +-!!-+ +-!!-+ ! !
- ! ! !! ! ! !! ! ! !
- ! ! ! ! ! ! !
- ! ------------------- ! !
- ! ! C1 C2 ! +---------------------------------)---+
- +----!Vcc ! ! !
- ---+ ! ! ! ! +5
- --- ! ! ! ! ----
- +----!+10v ! ! ! ! >>
- ! ! ! +-----------------------------+ V //
- PC ! ! ! ! '393 ---
- RS232 ! ! ! ! !----! ! IR
- >-----!TxO1 TxI1!--+ ! ! A! +-/\/\---+ LED
- Tx ! ! ! ! B! 2N3904 ! 56R
- !TxO2 TxI2! +---!> C! !/
- ! ! +-------!R D!----/\/\----!
- >-----!RxI1 RxO1!--+ !----! 1k2 !\!
- Rx ! ! - !
- !RxI2 RxO2! !
- ! ! ---
- >--+ ! -10V Gnd ! ///
- Sg ! -------------------
- ! ! !! !
- ! +--!!--+
- ! !! !
- --- + !
- /// !
- ---
- ///
-
-
- Good luck with the construction.......
- Tony Duell, H.H.Wills Physics Lab, University of Bristol, Tyndall Avenue,
- Bristol, England.
- JANET : ARD@UK.AC.BRIS.PVA
- INTERNET: ARD@PVA.BRIS.AC.UK
-
-