home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!ogicse!usenet.coe.montana.edu!saimiri.primate.wisc.edu!zaphod.mps.ohio-state.edu!uwm.edu!csd4.csd.uwm.edu!hardiman
- From: hardiman@csd4.csd.uwm.edu (Paul V Hardiman)
- Newsgroups: comp.protocols.tcp-ip.ibmpc
- Subject: KA9Q RIP problems
- Message-ID: <1k3nm6INNlpb@uwm.edu>
- Date: 26 Jan 93 16:08:38 GMT
- Article-I.D.: uwm.1k3nm6INNlpb
- Distribution: usa
- Organization: Computing Services Division, University of Wisconsin - Milwaukee
- Lines: 18
- NNTP-Posting-Host: 129.89.7.4
- Originator: hardiman@csd4.csd.uwm.edu
-
- I'm having problems getting ka9q to recognize RIP broadcasts.
- The system is configured with 2 Ethernet connections supported
- by packet drivers and 1 SLIP connection that is not currently
- in use. The RIP messages are broadcast to addresses in the
- form 129.89.6.255 and 129.89.21.255. ka9q's outgoing RIP
- messages are broadcast to the same addresses and are handled
- OK by other routers on the subnets. According to ka9q traces
- the incoming RIP messages are formatted correctly. But when
- I issue the RIP STATUS command, ka9q reports that there have
- been no incoming RIP messages.
-
- Does anyone have any idea what is going wrong?
-
- Thanks for any insight you may offer.
-
- Paul Hardiman
- University of Wisconsin - Milwaukee
- hardiman@csd4.csd.uwm.edu
-