home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.os.msdos.pcgeos
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!dtaylor
- From: dtaylor@magnus.acs.ohio-state.edu (Douglas A Taylor)
- Subject: Re: Stacker & GeoPro
- Message-ID: <1993Jan26.131856.29594@magnus.acs.ohio-state.edu>
- Sender: news@magnus.acs.ohio-state.edu
- Nntp-Posting-Host: bottom.magnus.acs.ohio-state.edu
- Reply-To: doug-taylor+@osu.edu
- Organization: The Ohio State University
- References: <9301260623.AA17072@hela.INS.CWRU.Edu>
- Date: Tue, 26 Jan 1993 13:18:56 GMT
- Lines: 20
-
- In article <9301260623.AA17072@hela.INS.CWRU.Edu> <pcgeos-list@pandora.sf.ca.us> writes:
- >Any suggestions.? I am continuing to try different combinations to see
- >if geos can remember... Is there some setting I can do or set.?
-
- This is from the FAQ. I hope it helps.
-
-
- Q: I'm running GWE 1.2 with Stacker installed. Drive C is my stacker
- volume (through SSWAP). For some reason GeoManager insists on
- looking at drive E for the /geoworks/world directory, even though
- when I exit geoworks, I'm on drive C. Any ideas?
-
- A: Check the volume labels for drives C, D, and E. If they're
- identical, then use GeoManager to edit the volume labels so that
- each drive has its own distinct label.
-
- --
- Doug Taylor | Nothing real can be threatened.
- The Ohio State University | Nothing unreal exists.
- doug-taylor+@osu.edu | - A Course in Miracles
-